Search Results for "frequency"

...A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most Arduino platforms. ESP32 support for using both RMT and i2s. RMT timing currently is sensitive to high interrupt frequency due to issues in the Core. There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. NeoPixelBus now supports the RMTs 8 channels and two more channels using i2s.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...

[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus...

Applications involving data acquisition from sensors need samples at a preset frequency rate, the filtering out of noise and/or analysis of certain frequency components. We propose a novel software architecture based on open-software hardware platforms which allows programmers to create data streams from input channels and easily implement filters and frequency analysis objects. The performances of the different classes given in the size of memory allocated and execution time (number of clock cycles) were analyzed in the low-cost platform Arduino-Genuino. ...

mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.

Linux utility to change the base clock (FSB/Front Side Bus) frequency on the fly.

... - The information that can be displayed are: CPU temperature (TP sensor) CPU temperature (AXP209 sensor) Hard Disk Temperature (you must have sata disk). Current CPU Frequency. Free memory% Used memory% - Personalized icons, background color and text color. - Can display diferent colors, in 3 ranges programmed temperatures. - Show Farenheit or Celsius temperature. - Temperature alarm option when the highest programmed range is reached (a simple stupid hint is showed). - Option to change the CPU frequency, and scale mode (governor, performance, interactive, ondemand, etc).

This tool let's you control the frequency and fan settings of your AMD/ATI video card. It depends on the proprietary AMD/ATI Catalyst display driver and makes use of the AMD Display Library (ADL).

CPU Frequency plugin for XFCE4 panel

A gui cpufreq configuration utility originally developed in Gambas for VectorLinux. It makes it easy to change the cpufreq governor and related frequency settings. It includes the CLI utility vcpufreq-load to set the saved configuration on system start.

A linux kernel module inspired by i7z that enables unprivileged users to monitor informations like current frequency (including Turbo Boost!) and temperature of Intels Core i processor family.

Regulador de Temperatura de El Suri (GNU/GPL) Sólo para Linux, testeado en OpenSuSE 11.3 x64 con procesadores Turion X2 El Suri Temperature Control (GNU/GPL) Just for Linux, tested on OpenSuSE 11.3 x64 with Turion X2 processors

Trayfreq is a GTK+ application released under GPL that lets you select your CPU's governor or frequency from a tray icon and displays information for your battery. Trayfreq is designed to be desktop-environment-independent.

Full functional PS/2 keyboard on Atmega16, works with simple circuits, and fully customizable. Performs really great! - ps2 / keyboard / ps2avr / controller / avr / hardware

k10ctl is an AMD Family 10h (aka K10) P-State, frequency and voltage modification utility . Its main purpose is overclocking and / or "undervolting" the CPU and to configure Cool'n'Quiet settings.

c2ctl is an Intel Core and Core 2 frequency and voltage modification utility. Its main purpose is overclocking and / or "undervolting" and to enable SpeedStep.

Processor Hardware Control is a patch for the Linux Kernel which provides a kernel interface for changing the voltage/frequency pairs of processors from userspace.

GFreqlet is a GNOME applet for Linux that not only monitors CPU frequency scaling, but also allows the end user to change the frequency or governor with just a click. It automatically detects which frequencies and governors your processor supports.

This Java program calculates the SPBRG value for a given baud rate (Baudrate) and clock frequency. It comes with a graphical interface and a simple value interpretation guide. A Java Webstart file (.jnlp) is provided.

This is the speed step daemon, for managing CPU frequency at runtime. Do not let the name fool you: it can be used with schemes other than Intel SpeedStep.

This is the PCMCIA device driver for the 1-2 mbit Frequency Hopping Symbol Spectrum24 WLAN card. We've also moved the 11 mbit Direct Sequencing code here. The 2.2.x and 2.4.x code trees have been merged.