Search Results for "color"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

...More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each segment's mode, color, speed, and direction (normal or reverse). Note, some effects make use of more than one color (up to three) and are programmed by specifying an array of colors. Random color introduced alternating from start and end of strip. Alternating white/red/black pixels running. Strobe effect with different strobe count and pause, controlled by speed setting. ...

This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards....

LEDSpicer is a linear LED controller daemon that will handle single color or a RGB LEDs connected to different devices. It allows the execution of animations and profiles and handle can input to interact with the LEDs, profiles can be triggered based on different events, like programs running, network input, game name, etc. Includes some utilities to make an arcade cabinet more attractive and cool!

Monitoring for your hardware components - CPU - GPU - RAM - Drives - Network - Fans Various customization options, such as - display the app as an app bar (Windows) - autostart after you initially logged in (Windows) - docking location[s] on different screens - adjust application font size & width - tailor update interval to your needs - various color options for you to modify - enable or disable specific monitors, hardware or sensors - and more ! S.M.A.R.T. data of your drives You can show various S.M.A.R.T. attributes of your drives, such as health, temperature, power-on hours and more, by simply clicking on the drives name in the drives monitor. Please check out Github for more details and up-to-date new releases / versions ! ...

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full...

This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs.

... - The information that can be displayed are: CPU temperature (TP sensor) CPU temperature (AXP209 sensor) Hard Disk Temperature (you must have sata disk). Current CPU Frequency. Free memory% Used memory% - Personalized icons, background color and text color. - Can display diferent colors, in 3 ranges programmed temperatures. - Show Farenheit or Celsius temperature. - Temperature alarm option when the highest programmed range is reached (a simple stupid hint is showed). - Option to change the CPU frequency, and scale mode (governor, performance, interactive, ondemand, etc).

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

Windows application released under GNU to precisely control color values for Alienware's AlienFX LED color schemes.

** Note: This projected has been halted. Please join #lg4l @ irc.freenode.net for more info.** A system of libraries and utilities to operate the Logitech G19 Gaming keyboard in linux and related operating systems.

A Linux printer driver/filter for the Lexmark Z11 and the Compaq IJ300 printer, supporting color and b/w printing, variable page size and more.

EVILib is a C++ library for controlling the serial interface with Sony color video cameras EVI-D30(31), EVI-D70(P) and EVI-D100(P). The library's C++ source is released under LGPL license. Sample program provided with the library. This project has moved to GitHub: https://github.com/Ideki/EVILib C++ library for controlling Sony EVI-D30/D70/D100 pan-tilt-zoom cameras over their serial interface. Active copy and future updates are on GitHub.