Search Results for "board"
Sort By:
Showing 54 open source projects for "board"
View related business solutions-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
1
Arduino core support for STM32
STM32 core support for Arduino
...The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website. -
2
NanoKVM
Affordable, Multifunctional, Nano RISC-V IP-KVM
Lichee NanoKVM is an IP-KVM product based on LicheeRV Nano, inheriting the extreme size and powerful features of LicheeRV Nano. The Lichee NanoKVM is available in two versions: NanoKVM Lite is a basic configuration that is suitable for individual users with certain DIY capabilities and enterprise users with bulk requirements. The NanoKVM Full is a full version with a sophisticated case and complete accessories, as well as a built-in system mirror card that is ready to use at boot, and is... -
3
Blynk C++ Library
Blynk library for embedded hardware
...It's a pure WYSIWG experience, no coding on iOS or Android required. Hardware can connect to Blynk Cloud (open-source server) over the Internet using hardware connectivity available on your board (like ESP32), or with the use of various shields (Ethernet, WiFi, GSM, LTE, etc). Blynk Cloud is available for every user of Blynk for free. Direct connection over Bluetooth is also possible. Check the included examples on how to use different types of connections (transports) and explore Blynk features. -
4
DIY Split-Flap Display
DIY split-flap display
This is a work in progress split-flap display. Each module can flip between 40 unique characters: letters, numbers, and a few symbols. Multiple modules fit perfectly alongside each other to build bigger displays. The primary design goal was to make something that's possible to fabricate at home in small or single quantities and can be customized and built by an intermediate hobbyist at a reasonable price. This meant using widely available materials and avoiding any tooling with a high... -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
almLib
EPICS High Resolution Timer and Alarm Clock Library.
...EPICS is the Experimental Physics Industrial Control System framework. This library supports Linux by utilizing POSIX functions. For RTEMS VME-Bus systems it supports the CPU cards mvme2100, mvme5500 and mvme6500 ("beatnik" board support). -
6
Arduino ASCOM Focuser Pro DIY
Arduino Focuser, fully ASCOM complaint
myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download -
7
L-ink_Card
Smart NFC & ink-Display Card
...Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. Because it uses e-ink, the card can display static content with minimal power drain, making it practical for real-world card use. The repository includes board design files, firmware, and supporting software for customizing what the card shows. For hardware hackers and smart-card enthusiasts, it’s a fascinating hybrid of microcontroller, low-power display, and NFC tech in a familiar credit-card size. -
8
deej
Set app volumes with real sliders! Arduino project to build hardware
...Runs from your system tray. Helpful notifications to let you know if something isn't working. The sliders are connected to 5 (or as many as you like) analog pins on an Arduino Nano/Uno board. They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file. -
9
Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
10
dgtdrv aims to be a uci/xboard/crafty compatible interface (input engine) for the DGT Electronic Chess board on POSIX platforms. It relies on the dgtnix library.
-
11
stm32f7nucleo-eastrising-7inch-lcd-spi
STM32 Nucleo STM32F746ZG interface to East Rising 7 inch LCD Panel
An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. -
12
can4linux
CAN bus device driver
...can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO -
13
USBphpTunnel
Android app for MXQ TVbox to control an Arduino board via USB from PHP
Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can... -
14
Smartcard Lib for Arduino compat. boards
Smartcard access lib for Arduino based boards
Smartcard access lib for Arduino based boards connected directly to a smartcard. This is currently a work in progress. Currently it is possible to communicate with a smartcard directly connected to a Arduino board or connected via a TDA8024T (or compatible chips. e.g. DS8024). All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte... -
15
OpenSOC86
Open implementation of the x86 architecture
...Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. In order to run the system in hardware a SDRAM and SRAM controller need to be added. These are currently in development. -
16
fx3load
fxload utility from linux-hotplug project updated for the FX3
...Oddly, as of January 2013 Cypress doesn't include this utility with its (open source) Linux SDK but requires developers to purchase a copy of MS Windows to be able to program the board. This SourceForge project contains no new code. -
17
Partially Reconfigurable Hardware
Framework for Adaptive Hardware Concurrent Systems with DPR-FPGAs
This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating... -
18
µClimaControl
Home made clima control for short expenses. PIC18F4455 based hardware.
Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc. -
19
qnutCNC
qnutCNC is a program to control the ethernut development board
qnutCNC is set out to control an ethernut development board which is running ucos2 and which in turn controls a CNC machine. -
20
the gumstix project will provide system, development, and user software for gumstix computers. this new form-factor linux system board (80mm x 20mm) aims to provide the open-source community an inexpensive hand-held device platform.
-
21
The Mobile Studio I/O board, developed at RPI, http://mobilestudio.rpi.edu/, provides students with the ability to perform laboratory experiments outside of the classroom. This project seeks to expand software support for this hardware to Linux.
-
22
A small application to help programmers learning usb interface to the PICDEM FS USB demonstration board. It assumes that the default firmware is running on the demo board.
-
23
-
24
This C++ and Qt based project provides an easy way to control the step motor boards PAO-3M and SMK-4M-4A from Grummes Elektronik GmbH from within your own application. Interfacing is done using the LPT parallel port.
-
25
Free general purpose loader tool for ATMEL's AVR controllers using arduino board or FTDI's FT232. PCB Files also available.
