Search Results for "i-conized" - Page 2

[Italiano] Addon per il driver del DVB-S2 del sunray (dm800se) per il supporto del triplo tuner (DVB-T e DVB-C). ATTENZIONE: le versioni "stabili" sono quelle pubblicate nella sezione download. I sorgenti si trovano nelle sotto-directory svn tags. La directory trunk del svn contiene la versione di sviluppo: può contenere codice non funzionante o non compilante. Utilizzarla solo per contribuire allo sviluppo. [English] DVB-S2 driver addon for sunray (dm800se), to activate the triple tuner (DVB...

This is a standalone preprocessor for the Verilog HDL language. It is modified from the Verilog-PreProcessor of Verilog Perl tool 3.314. Most of the code is written by the team led by Wilson Snyder. What I have done in this project: * Provide a standalone command line interface (without Perl). * Replace the parts implemented in Perl to C++. * Encapsulate the package in a separated namespace for better independence. What I may do in the future: * Replace the C language features to C...

A Linux driver for RTD DM5408 / DM408 ISA acquisition card. A DKMS module and a dynamic library written from scratch but trying to keep same functions structure of its official Windows 98 driver. I don't recommend it for production. I'm just trying to learn writing drivers for Linux with some interest in Electronics Interfacing.

iogen is a lightweight tool that generates heavily fragmented I/O. This tool is intended to test storage stacks under stress and worst case scenarios. Due to heavy fragmentation of the I/O files, it tends to "bypass" caching algorithms in hardware.

A linux kernel module inspired by i7z that enables unprivileged users to monitor informations like current frequency (including Turbo Boost!) and temperature of Intels Core i processor family.

The Mobile Studio I/O board, developed at RPI, http://mobilestudio.rpi.edu/, provides students with the ability to perform laboratory experiments outside of the classroom. This project seeks to expand software support for this hardware to Linux.

A Linux program/library for interfacing the Velleman k8055 USB I/O board

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

This is a front end to the Sony Programmable I/O Control Device Driver. This spicctrl is used for configuring screen brightness, getting battery status, getting ac status, etc...

mmapper allows to access every resource attached to the machine. It can read and write any physical address on the memory bus, any I/O port and any field of the PCI space configuration of any peripheral.

INSTALL USB KEY HUAWEI E169 and E156. Risolve i problemi di rilevamento del modem in Xandros installando i parametri HUAWEI E169/E156 di H3G Italia.Progetto OpenSource,versione 1.0 da ampliare. Modem driver for linux OS (XANDROS)

Userspace Driver and application to control DMX-512 devices through Velleman's K8062 kit under Linux. This is only a proof of concept, I never found the time to go further (a full kernel driver using either a block device or a /proc file)

An high speed Linux device driver for the digital parallel I/O board DIO32HS produced by National Instrument. Currently we tested only computer input, were we get more than 5.5Mbytes/sec on a 32 bit wide bus.

This is a project of an open source library that makes possible to command I/O ports such as LPT or Serial port from any OS by the same functions. It includes also some portable time functions (delay_us(microseconds); delay_ms(milliseconds);)

This is a project designed primarily to assist my task as a server admin for a small hosting company, however I hope by releasing it as open source software the community can benefit from it in some way as well.

Linux kernel level driver to allow access to the I/O of the Beckhoff CX-1100 power supply used with the Beckhoff CX-1000 embedded PC. This allows access to the K-Bus and IP-Bus of the Beckhoff system.

Parapin makes it easy to write code under Linux that controls individual pins on a PC parallel port. This kind of control is very useful for electronics projects that use the parallel port as a generic digital I/O interface (instead of as a printer port)

python interface to vellman k8055 I/O board

This project is the conversion of the Comport Package of dejancrn and dybdahl, for lazarus pascal project. It just work on windows but in the future, I traduce it to work under lazarus for linux.

I stoped driver development here. This project contains outdated version of the driver just for the reference, please visit Parabel ltd. site for the driver updates and support. Linux 2.6.x Zaptel driver for the 2,4 and 8 E1 ports Parabel Quasar E1 PCI/PMC interface board. This driver allows to use board as the hardware for the Asterisk(tm) project.

Parallel Events and Asynchronous tasKing Library. Originally combining multi-threading with an efficient I/O event model, it's now more a lightweight object-oriented framework for event-based applications.

Linux kernel mode driver for Delcom USB I/O board: http://www.delcom-eng.com/productdetails.asp?productnum=802004

This Is A Small Little App I Wrote In Java That Can Calculate CPU Ghz off of the FSB Multiplier and Company(Intended For Overclockers)!

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

Cylon is a project to send various patterns to a simple LED display connected to the parallel port of a standard PC. The low-level drivers currently support Linux, but I have ported it to FreeBSD and Cygwin.