Search Results for "device driver" - Page 2

The SCSI Bus Analyzer Solution (scsitrace) is a Linux device driver that can be enabled on-the-fly to capture protocol traces trafficking across SCSI-based storage devices.

usb-robot is a set of software tools for communicating with generic USB devices from userspace using libusb. It can be used to send commands to the device directly from the console (usb-robot-slave), or as a backend to some rapidly prototyped driver in

This project provides a chip card interface device driver for the PC/SC Lite server deamon (pcscd). The driver provides a standard PC/SC interface to NFC devices supported by libnfc. Note, that this project is currently not actively developed. However, the code has been adopted by the libnfc-Team. See https://code.google.com/p/ifdnfc/source/checkout.

Project to develop a Linux LIRC device driver for the RedRat 3 (until the driver is accepted into the LIRC project). The RedRat3/Rerdat3II is a USB IR receiver/transmitter product (http://www.redrat.co.uk/)

The Linux driver and control program for Sentelic's Finger-sensing Pad devices(STL3886/STL3888). The Finger-sensing Pad is a pointing device using PS/2 interface to communicate with PC or Laptop.

hidtouch is an input device driver supporting USB touchscreens that are not recognized by Linux as event devices but as regular HID devices. A few companion programs will ease the setup and calibration process.

Mind the re-programmable hardware, even CPU for most mobile devices. Flushable devices. Flushable CPU, modem, camera - any kind of EMPTY NAND device, creating a new one by the engineering forth and back and forward again. We recreate the world

This project will implement USB device drivers for the "OSR USB FX2 Learning Kit" device by Open Systems Resources Inc on several OSes. The intent it to allow USB driver developers compare & contrasts the different OS driver development environments.

This project is an attempt to provide the Linux community with kernel drivers for two hugely popular DVD playback cards namely DXR3 from Creative Labs and Hollywood Plus from Sigma Designs.

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

This is a front end to the Sony Programmable I/O Control Device Driver. This spicctrl is used for configuring screen brightness, getting battery status, getting ac status, etc...

This project is largely defunct. The lpfc driver has been upstream for many years and can be readily found in the distributions. Recent driver kits can be found on the Emulex.com website as well as websites for various OEMS. OLD: This project is a development area for a Linux Device driver for Emulex Fibre Channel HBA's, targetting the Linux 2.6 kernel. For White Papers and Errata, please see the driver download area.

"flashmanager" is a software to manage the flash partitions from user-space. This uses an underlying driver layer for interaction with the flash device.

This project provides a linux kernel module driver for the Velleman K8055 USB Experiment Interface Board. It creates and gives you access to /dev/k8055 virtual device file. You can communicate with the driver via ioctl() from c programs. Happy hacking!

Python module for the i2c-tiny-usb project available here: http://www.harbaum.org/till/i2c_tiny_usb/index.shtml The module is an alternative for the linux kernel driver. With this module you can directly communicate with an I2C device. Discarded - Use Ti

A device driver in 'C' for interfacing a uController with a Displaytech 64128A LCD display (or its variants).It was written and tested on a Renesas R8C/25 microcontroller proto-board. It provides control, text and graphics functions as function cal

Userspace Driver and application to control DMX-512 devices through Velleman's K8062 kit under Linux. This is only a proof of concept, I never found the time to go further (a full kernel driver using either a block device or a /proc file)

sdricoh_cs is a Linux driver for Ricoh Secure Digital and MMC Card Readers that announce themselves as Ricoh Bay1Controller pcmcia device.

An high speed Linux device driver for the digital parallel I/O board DIO32HS produced by National Instrument. Currently we tested only computer input, were we get more than 5.5Mbytes/sec on a 32 bit wide bus.

This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions

V4L2 Virtual Device is a driver providing one or multiple video pipes. It is used to route the output of a user space video source application to typical video “consuming” applications (players, encoders, PVRs) that are compatible with v4l2 devices.

A Java interface to the joystick or any other input device with 2-6 degrees of freedom (Works on Windows and Linux).

A Linux 2.6.x device driver for capturing and sending raw Fibre Channel packets on Tachyon-chip based PCI boards. It appears to the system as an Ethernet interface using the T11 FCOE Fibre channel over Ethernet protocol.

X10 device drivers for Linux creating a /dev device for each X10 unit in the house. This allows command line, script, and program access to the X10 network.This driver currently supports the PowerLinc Serial, PowerLinc USB, and CM11A.

TiVo USB Wireless Adapter device driver for Linux and Windows. The adapter users the Broadcom BCM4320 (AirForce One. Single-Chip 802.11g USB 2.0 Transceiver) chipset and portions of this project may be directly applicable to other devices using the same.