Open Source Linux Hardware Platforms - Page 13

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

jTomtom is et Java GPS updater. With jTomtom you can update the QuickFix et Radar POI in your Tomtom GPS

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

The Cerberus Test Control System is a free (freedom) test suite for use by developers and others to test hardware. Originally developed at VA Linux Systems, it includes a modular test system that allows you to build and integrate your own tests.

"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. (We are not affiliated in any way with companies/persons mentioned on this page. All brand names and trademarks are property of their respective owners. The author is not affiliated with PPG. "CommBusTerm" is not a product by PPG.)

DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only using manufacturer’s software where the same permission applies).

Additional information and patches for a FTDI USB/Serial converter device driver for linux 2.6.x kernels.

The Fault Injection Test Harness provides a uniform mechanism for writing reliable test case to validate a Linux device driver can gracefully handle software and hardware fault conditions.

HKontrol simplifies the operation of harman kardon A/V receivers that are equipped with a serial interface.

Linux support for Easy Access and Internet keyboards (e.g. Compaq). Features: X11 support : Window Manager independant : all keys user-configurable (GUI & .conf file) : volume control : sound controls

Mplinuxman is a file manager program for the Mpman F60 USB portable MP3 player, for Linux. It lets you send/recieve files to your MP3 player using a graphical user interface (Gtk2) and features playlists, ID3 tags on the player and more .

A small application to help programmers learning usb interface to the PICDEM FS USB demonstration board. It assumes that the default firmware is running on the demo board.

Serbert is a command line utility which performs a Bit Error Rate Test (BERT) on serial lines for Unix and it's variants. It does this by transmitting bytes, and waiting for their uncorrupted return. Bit error rate testers are used to test and fault

USBLib based driver for USB foam missile launcher toys. Currently two launchers are supported, but others can easily be added.

A library providing intuitive and easy to use routines for retrieving and manipulating data related to wireless interface devices.

fprint aims to plug a gap in the open source desktop, by providing support for consumer fingerprint scanners as standard.

Userspace tools for the logitech g15 keyboard. These tools can be used to display custom content on the lcd and also to handle the extra keys of the keyboard.

A Linux GUI for the iRiver iFP flash portable player. This app is similar to the iRiver Manager for Windows. iFP-GUI supports upload, download, delete, rename, device status (like battery status, etc.), tuner, and playlist uploads.

Canon EOS class remote control utility for 300D, 350D, 30D, 20D and 5D. It is possible to control more of Canon cameras in the same time up to six cameras attached. Multican allows scripted remote control of multiple cameras.

A portable library to control the ICOM PCR-1000 computer controlled general purpose radio receiver and gui front ends for X, Aqua, and windows32

Interfaz gráfica para configurar el ahorro de energía en laptops. Permite configurar frecuencia de CPU y prender o apagar la placa wireless y bluetooth con solo unos clicks. Prototipo en bash+zenity si tiene aceptación será reescrito en otro leng

Programmer for 8051 compatible microcontollers

The Legacy Ralink drivers have permanently been deprecated in favor of the in-kernel rt2x00 drivers. See http://rt2x00.serialmonkey.com for the rt2x00 project website.

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via github.com/pyzahl/Gxsm4 (source code) or as binary for Ubuntu on https://launchpad.net/~totto/+archive/ubuntu/gxsm