Search Results for "software without code"

myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 315,606+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2026. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - https://sourceforge.net/projects/myfp2esp8266-focus-controller/ myFP2N - Nextion touch screen display - https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2N%20NEXTION%20TFT%20DISPLAY/ myFP2M - Ready made Controllers https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/myFocuserPro2M/ Please look in the Files-Documents folder for more information. ...

...High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via github.com/pyzahl/Gxsm4 (source code) or as binary for Ubuntu on https://launchpad.net/~totto/+archive/ubuntu/gxsm

This is the JEDEC and Source for both a Dual 7-Segment Hexadecimal and a Single 7-Segment Hexadecimal Display Driver using GAL22V10 and GAL16V8 PLDs. The driver uses a clocked input to multiplex the displays, so that one display is lit when the clock is high, and the other when the clock is low. With a fast enough clock speed the two displays both appear to be displayed at the same time. The code is written for WinCUPL. See the Instructables page for more...

FPGAsm is a low-level alternative to verilog and VHDL. A near-instant 'assembler for FPGAs', this simple yet powerful language facilitates bottom-up design, layout and wiring of modules, and generation of .xdl output. With about 10 keywords to learn, you can start making circuits in minutes. Now you can focus on learning the ins and outs of the FPGA instead of complex tools and languages. Fast turnaround time and bottom-up approach invite exploration, experimentation, live circuit...

...id=5555 2) 100% charge shown as 99%, because there is two digit positions. 3) Status icon updates every 30 seconds. There is no way to change this interval other than re-compile source code. 4) Tested on Windows XP SP3. Works perfectly. If you have any troubles using this software, please contact me via e-mail immediately.