Search Results for "environment-modules"

VTracer is a Verilog Testbench developer aid. Contains well documented Verilog-Perl co-simulation environment (TCP sockets based), structural Verilog parser, demo Testbenches.

Identify sizes of memory modules installed on a Solaris, Linux, FreeBSD or HP-UX workstation or server. memconf reports the size of each SIMM/DIMM memory module installed in a system. It also reports the system type and any empty memory sockets. In verbose mode, it also reports the following information if available: - banner name, model and CPU/system frequencies - address range and bank numbers for each module

library to drive several displays (with built-in controllers or display modules, a.s.o.)

...OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface...

FPGAsm is a low-level alternative to verilog and VHDL. A near-instant 'assembler for FPGAs', this simple yet powerful language facilitates bottom-up design, layout and wiring of modules, and generation of .xdl output. With about 10 keywords to learn, you can start making circuits in minutes. Now you can focus on learning the ins and outs of the FPGA instead of complex tools and languages. Fast turnaround time and bottom-up approach invite exploration, experimentation, live circuit testing and physical test harness creation, radically changing the workflow. ...

Displays battery charge indicator in the system tray. NOTE: 1) Requires Visual C++ 2010 run-time environment installed. You can get it here: http://www.microsoft.com/en-us/download/details.aspx?id=5555 2) 100% charge shown as 99%, because there is two digit positions. 3) Status icon updates every 30 seconds. There is no way to change this interval other than re-compile source code. 4) Tested on Windows XP SP3. Works perfectly.

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

i2ctools is a linux-lm_sensors-like utilities contain i2cget.exe and i2cset.exe, but run under OLD MS-DOS environment and written in Assembly(MASM-6.11) Now they work on Intel ICH-x series Chipsets