Search Results for "usb linux"

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

PyUSB provides USB access on the Python language.

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.

...As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as serial devices) are able to be controlled. KMTronic's USB and Serial relay boards are selectable in the configuration menu, other boards can be setup by entering their control commands. Although primarily designed for irrigation you can use AIC to control a large variety of hardware, for example lighting, heating etc It is envisaged that future implementations of AIC will incorporate rules for more complex device control.

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

Emulation of iso to cd using external usb storage, Portable usb cdrom library.

Software and Arduino shield design for a Serial-to-HID device such that old serial gaming devices can be used as USB Hid devices, particularly the SpaceOrb360 and Spaceball 3d CAD devices.

usb-robot is a set of software tools for communicating with generic USB devices from userspace using libusb. It can be used to send commands to the device directly from the console (usb-robot-slave), or as a backend to some rapidly prototyped driver in

Linux driver for the Philips SRM 7500 remote control. This remote control uses a USB dongle implementing IEEE 802.15.4 MAC layer for bidirectional RF communication which also allows controlling the remote's small display.

Portable .NET driver imports for Pico USB oscilloscopes and data loggers. Verified to be working under Windows and several Linux distributions.

A simple python module to interface with DMX to USB devices

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

SANE backend and stand-alone driver for Canon CanoScan parallel scanners (FB320P, FB620P, FB330P, FB630P, N340P, and N640P). Please note FB310P is NOT currently supported, sorry. For USB model support go to http://canon-fb630u.sourceforge.net/

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.

HP Scanjet 2200C Driver for SANE - Closed because the scanner is now fully supported in the official SANE distribution.