Search Results for "linux os usb"

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.

i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.

PyUSB provides USB access on the Python language.

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.

...As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as serial devices) are able to be controlled. KMTronic's USB and Serial relay boards are selectable in the configuration menu, other boards can be setup by entering their control commands. Although primarily designed for irrigation you can use AIC to control a large variety of hardware, for example lighting, heating etc It is envisaged that future implementations of AIC will incorporate rules for more complex device control.

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

...The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus RTU’ and ‘Modbus ASCII’ serial communication versions of the protocol, and is intended for use on Linux, OS X and Windows platforms. It is open source, and has the Apache License, Version 2.0.

Library and command line program providing access to the EEPROM of an Silabs CP2101 / CP2102 / CP2103. It can programm the USB-Descriptors and the Baudrate table.

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

Emulation of iso to cd using external usb storage, Portable usb cdrom library.

Software and Arduino shield design for a Serial-to-HID device such that old serial gaming devices can be used as USB Hid devices, particularly the SpaceOrb360 and Spaceball 3d CAD devices.

Hercules is an open source software implementation of the mainframe System/370 and ESA/390 architectures, in addition to the new 64-bit z/Architecture. Hercules runs under Linux, Windows, Solaris, FreeBSD, and Mac OS X. Hercules was created by Roger Bowler and is maintained by Jay Maynard. Jan Jaeger designed and implemented many of the advanced features of Hercules, including dynamic reconfiguration, integrated console, interpretive execution and z/Architecture support. A dedicated crew of programmers is constantly at work implementing new features and fixing bugs.

usb-robot is a set of software tools for communicating with generic USB devices from userspace using libusb. It can be used to send commands to the device directly from the console (usb-robot-slave), or as a backend to some rapidly prototyped driver in

Linux driver for the Philips SRM 7500 remote control. This remote control uses a USB dongle implementing IEEE 802.15.4 MAC layer for bidirectional RF communication which also allows controlling the remote's small display.

Portable .NET driver imports for Pico USB oscilloscopes and data loggers. Verified to be working under Windows and several Linux distributions.

RackMonkey is a tool for managing racks of equipment such as servers and switches. You can keep track of what's where, which OS it runs, who it belongs and what it's used for. RackMonkey quickly finds any device and draws a rack diagram of its location

Control and automation software for the home environment. Written in Java for OS-independence, it also aspires to be multi-protocol (X10, Insteon, Zigbee, etc), and multi-channel (Swing clients, web, J2ME, etc). A home 'operating system'.

A simple python module to interface with DMX to USB devices

This is a project of an open source library that makes possible to command I/O ports such as LPT or Serial port from any OS by the same functions. It includes also some portable time functions (delay_us(microseconds); delay_ms(milliseconds);)

lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca

An OS independent implementation of the famous tool for custom LCD control - LCDHype. The program enables for complex and fully customizable screen control through easy to use scripting langauge similar to Pascal.

BTnodeRFID provides a mobile RFID reader for the ISO 15693 RFID standard with a Bluetooth interface based on existing hardware components. Software libraries to access the reader for J2SE, J2ME and Symbian platforms are included.