Search Results for "c for windows 8"
Sort By:
134 programs for "c for windows 8" with 2 filters applied:
-
SKUDONET ADC, operates at the application layer, efficiently distributing network load and application load across multiple servers. This not only enhances the performance of your application but also ensures that your web servers can handle more traffic seamlessly.
-
Over two-thirds of people reuse passwords across sites, resulting in an increasingly insecure e-commerce ecosystem. Learn how passwordless can not only mitigate these issues but make the authentication experience delightful. Implement Auth0 in any application in just five minutes
-
1
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
2
dfu-util
Multiplatform USB DFU host utility
dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB. -
3
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
4
Open source Algol 68 implementations
Implementations for the Revised Report language
... of the vintage Algol68RS (UK Defense Research Agency) compiler. The implementation emits C code. -
Managing your therapy and rehab practice is a time-consuming process. You spend hours on paperwork, billing, scheduling, and more. Raintree’s Therapy & Rehab EHR is here to help you manage your practice more efficiently. With our all-in-one solution, you’ll get the tools you need to streamline your therapy and rehab practice, improve patient care, and get back to doing what you love.
-
5
Documentation, examples, and reference driver code for the VMware virtual graphics device used by all VMware virtual machines. This project provides the information and code necessary to write both 2D and 3D graphics drivers for this device.
-
6
A new 64-bit RISC platform, complemented by a set of development tools, standards specifications and synthesizable VHDL implementations.
-
7
VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.
-
8
This software supports programming Logitech(R) Harmony(TM) remote controls. It provides most of the functionality of the Windows software provided by Logitech(R), but is much smaller and cross-platform. This software allows you to update or backup configurations, upgrade firmware, or do IR-learning. NOTE: Development has moved to github: http://www.github.com/jaymzh/concordance
-
9
GSmartControl
Hard disk drive and SSD health inspection tool
GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it. -
New customers get $300 in free credits to spend on Speech-to-Text. All customers get 60 minutes for transcribing and analyzing audio free per month, not charged against your credits.
-
10
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
11
Gammu
Cellular manager for mobile phones/modems
Gammu is a cellular manager for mobile phones/modems. It contains libraries and functions for ringtones,logos,phonebook,SMS,etc. (used by external software), a command line version (with backup/restore) and SMS gateway (with MySQL and PostgreSQL supp -
12
control cd organizer devices with a plugin-based architecture. Currently supports Dacal DC-300 and KDS CDM-751
-
13
iwattnick
iWattnick: the ultimate e-bike computer
iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to... -
14
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back... -
15
ttylog - a serial port logger
Serial port logger which can be used to print to stdout.
The program ttylog is a serial port logger which can be used to print everything that comes in to a serial device to stdout. The device and the baud rate can be specified on the command line and a timeout can be set instead of just killing the process in order to stop it. You can also elect to have the output being sent to standard out to be time stamped. -
16
C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.
-
17
VTD-XML is the next generation XML parser/indexer/editor/slicer/assembler/xpath-engine that goes beyond DOM, SAX and PULL in performance, memory usage, and ease of use.
-
18
This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie
-
19
Advanced Irrigation Controller
Automated Irrigation Controller for computers
AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as serial... -
20
Ultimate 1MB (U1MB) Rom Builder
Rom Builder Utility for Atari 8 bit Ultimate1MB upgrade
This utility is used to create/maintain ROM images for flashing to the Ultimate 1MB device. It's main purpose is to customize your U1MB device to your needs. -
21
Driver para impresor / controlador fiscal EPSON en JAVA. Utiliza JNI para comunicacion con puerto serie. Testeado en winxp, linux x86_64, win7 32 / 64 sobre TMU-220AF. solo rollo papel continuo (chicos)
-
22
Serial Wire Debug (SWD) Open Library for low level Debug Access Port (DAP) on new ARM Cortex CPU devices. PROJECT HAS MOVED TO https://GitHub.com/CeDeROM/LibSWD PLEASE UPDATE YOUR LINKS! :-)
-
23
XRF Config
Cross platform configuration tool for Ciseco XRF radio devices
A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it. -
24
jnostromo
E-Sport Drivers for the Razer Nostromo
Deprecated - please use Keyboarding Master: https://sites.google.com/site/keyboardingmaster/ jnostromo provides drivers for the Razer Nostromo & Belkin N52/N52te designed to be E-Sport legal. Profiles are unique user defined keymappings and can be created for each game. Each profile can have up to 8 unique keymaps with mappings to switch between keymaps. jnostromo includes an easy to use configuration gui to map keys from the nostromo to the keyboard and/or mouse. The configuration... -
25
usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.