Search Results for "c command prompt"
Sort By:
18 programs for "c command prompt" with 2 filters applied:
-
Auth0 Free: 25K MAUs + 5-Min SetupProduction-ready login in 10 lines of code. SSO, MFA & social auth included. Scale seamlessly beyond free tier with Okta’s enterprise security.
-
Secure remote access solution to your private network, in the cloud or on-prem.OpenVPN is here to bring simple, flexible, and cost-effective secure remote access to companies of all sizes, regardless of where their resources are located.
-
1
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
2
dfu-util
Multiplatform USB DFU host utility
dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB. -
3
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
4
A new 64-bit RISC platform, complemented by a set of development tools, standards specifications and synthesizable VHDL implementations.
-
Save hundreds of developer hours with components built for SaaS applications.Whether you want full self-service analytics or simpler multi-tenant security, Qrvey’s embeddable components and scalable data management remove the guess work.
-
5
This software supports programming Logitech(R) Harmony(TM) remote controls. It provides most of the functionality of the Windows software provided by Logitech(R), but is much smaller and cross-platform. This software allows you to update or backup configurations, upgrade firmware, or do IR-learning. NOTE: Development has moved to github: http://www.github.com/jaymzh/concordance
-
6
BRL-CAD
Open Source Solid Modeling CAD
BRL-CAD is a powerful cross-platform constructive solid geometry solid modeling system that includes an interactive geometry editor, ray-tracing for rendering & geometric analyses, network distributed framebuffer support, image & signal-processing tools. -
7
Gammu
Cellular manager for mobile phones/modems
Gammu is a cellular manager for mobile phones/modems. It contains libraries and functions for ringtones,logos,phonebook,SMS,etc. (used by external software), a command line version (with backup/restore) and SMS gateway (with MySQL and PostgreSQL supp -
8
control cd organizer devices with a plugin-based architecture. Currently supports Dacal DC-300 and KDS CDM-751
-
9
W-Bus library and applications
W-Bus communication library
This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back... -
Free CRM Software With Something for EveryoneThink CRM software is just about contact management? Think again. HubSpot CRM has free tools for everyone on your team, and it’s 100% free. Here’s how our free CRM solution makes your job easier.
-
10
ttylog - a serial port logger
Serial port logger which can be used to print to stdout.
The program ttylog is a serial port logger which can be used to print everything that comes in to a serial device to stdout. The device and the baud rate can be specified on the command line and a timeout can be set instead of just killing the process in order to stop it. You can also elect to have the output being sent to standard out to be time stamped. -
11
HarmonyHubControl
C++ Application to Control a Logitech Harmony Hub
C++ Application to Control a Logitech Harmony Hub. See the Readme in the Files section for more information. -
12
In-circuit programming (ISP) tool for the NXP (Philips) LPC800/LPC1100/LPC1200/LPC1300/LPC1700/LPC1800/LPC2000/LPC4300 series ARM7/Cortex-M0/Cortex-M0+/Cortex-M3/Cortex-M4 microcontrollers
-
13
Antec Kuhler 920 Linux Driver/Control
Antec Kuhler 920 Linux Driver/Control
Linux Driver and control program for the Antec H20 - 920 Series liquid coolers. -
14
-
15
This is a project of an open source library that makes possible to command I/O ports such as LPT or Serial port from any OS by the same functions. It includes also some portable time functions (delay_us(microseconds); delay_ms(milliseconds);)
-
16
An OS independent implementation of the famous tool for custom LCD control - LCDHype. The program enables for complex and fully customizable screen control through easy to use scripting langauge similar to Pascal.
-
17
URBI: Universal Robotic Body Interface. URBI is a scripted command language used to control robots (AIBO, pioneer,...). It is a robot-independant API based on a client/server architecture. Liburbi C++/Java/Matlab are available here. Forum available at ht
-
18
JTAG base library, ARM7TDMI and MIPS debugger stubs for GDB. Extendable architecture to add JTAG device drivers, debuggers, and custom JTAG applications.
- Previous
- You're on page 1
- Next