Search Results for "what"

...Make sure you can use it from the terminal window. The entire Particle firmware is contained in this repository. The main user code sits in the application.cpp file under firmware/user/src/ folder. Unless you know what you are doing, refrain from making changes to any other files. After you are done editing the files, you can rebuild the repository by running the make command in the firmware/main/ directory. If you have made changes to any of the other directories, make automatically determines which files need to be rebuilt and builds them for you.

...Because it uses e-ink, the card can display static content with minimal power drain, making it practical for real-world card use. The repository includes board design files, firmware, and supporting software for customizing what the card shows. For hardware hackers and smart-card enthusiasts, it’s a fascinating hybrid of microcontroller, low-power display, and NFC tech in a familiar credit-card size.

...Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along with FreeRTOS. Please see: LcdTest_ReadMe.pdf or LcdTest_ReadMe.odt. The project is simply a personal record of what has been done, and will not be developed further.

...At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. What more? Enjoy. Sources in github https://github.com/msillano/USBphpTunnel Preconditions: MXQ + Palapa Web server, Arduino UNO Install: - Download USBphpTunnel11_d.apk and the full test_files dir - See file /test_files/readme.txt

...NOTE: FakeSMC & Plugins starting from v915 provide additional sensors information to HWMonitor then running on Macs. By installing FakeSMC on real Mac you should consider you know what you are doing and how to recover your system if something will goes wrong. All repositories: Sourceforge, sources & downloads: https://sourceforge.net/projects/hwsensors/ BitBucket, sources & downloads: https://bitbucket.org/kozlek/hwsensors/overview Assembla, sources: https://www.assembla.com/code/fakesmc/git/nodes GitHub, sources: https://github.com/kozlek/HWSensors HWSensors Project (c) 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan and others. ...

crowOS aims not to be a big, wide-spread OS, but only a sort of hobbie-OS of mine, mainly for fun and to learn more about what is going on "under the hood". For now, it will be based on the x86-architecture, written mainly in C but also some Assembly.

...The PID algorithm will insure that the motor will not get into hold vibrations if the pot has some influences. This article will describe where you have to take attentions and what you have to setup to get the best results. The project will help you to connect any arduino motor shield or other H-Bridges to the controller because it is open source and the output pins can therefor be changed as you like. You can upload a better modified version and improove this article by contacting me. With some pin changes you can port this code to other arduino boards.