Search Results for "video-making"

...Run the configurator on any device, whether it is using Windows, MacOS, Linux, or Android. With the Betaflight OSD you can get all relevant flight metrics directly into your FPV video feed. An easy-to-use drag-and-drop configuration allows the placement of values like used mAh and LiPo Voltage readings. Additionally, you can change most firmware settings using stick commands without even removing your goggles.

...The project combines a DBus daemon with a Qt graphical user interface, allowing users to inspect and adjust performance characteristics of their hardware—particularly GPUs—under Linux. TuxClocker provides a user-friendly GUI atop lower-level interfaces, making it easier to control clock speeds, fan behavior, and other tuning parameters without resorting exclusively to command-line tools. It is especially useful for Linux enthusiasts and power users looking to optimize performance for gaming, content creation, or benchmarking. The project also has a companion command-line version (tuxclocker-cli), broadening usability scenarios for scripting or headless setups. ...

...The entire Particle firmware is contained in this repository. The main user code sits in the application.cpp file under firmware/user/src/ folder. Unless you know what you are doing, refrain from making changes to any other files. After you are done editing the files, you can rebuild the repository by running the make command in the firmware/main/ directory. If you have made changes to any of the other directories, make automatically determines which files need to be rebuilt and builds them for you.

...Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library

mbpfan is a lightweight daemon for Linux that provides fan speed management for MacBook and MacBook Pro hardware. It reads temperature data via the coretemp kernel module and drives fan speeds through the applesmc interface, making it especially valuable for users running Linux natively on Apple hardware where automatic thermal control may be lacking. The daemon supports multiple processors and multiple fans, allowing flexible configurations for complex Mac models, and aims to keep systems both cool and quiet by dynamically adjusting fan behavior. While originally based on Allan McRae’s mbpfan, this enhanced version expands compatibility and tuning options. ...

Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system.

...Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. Because it uses e-ink, the card can display static content with minimal power drain, making it practical for real-world card use. The repository includes board design files, firmware, and supporting software for customizing what the card shows. For hardware hackers and smart-card enthusiasts, it’s a fascinating hybrid of microcontroller, low-power display, and NFC tech in a familiar credit-card size.

Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.

libVISCA is a library for controlling a VISCA compliant video camera. VISCA is a professional camera control protocol, designed by Sony to be used on several of its surveillance and OEM block cameras.

This project is aimed to add the ADMtek compatible USB-Ethernet converter support to the ARM systems, including Android. The patch provided is intended for http://pegasus2.sourceforge.net/ Pegasus/Pegasus II USB Ethernet Linux driver. It allows the driver successfully run on ARM making it send the correctly aligned requests for DMA. Tested on Android 4.2.2 (Linux 3.0.36) with DesignWare USB 2.0 OTG Controller (DWC_OTG). Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

...Only one wire simplex serial communication at baudrate 9600 is required to communicate with serialLCD module. The library & firmware file is released in public domain as open-source project. Feel free to edit/improve/share it. *** Raspberry Pi python library added. video available on youtube at: http://youtu.be/adNOWREWuL8

QuickCam VC device driver for linux based on V4L V4L2 specifications.

Testcard is a SDL/SDL_gfx based monitor test pattern (test card) generator. SMPTE and other test patterns are supported. Future plans include a very basic scripting capability to construct custom test patterns from built in primitives.

Libre Software to manage audio/video connection from a PC to a libre hardware real time stethoscope hardware, developed to allow doctors make a remote diagnose in real time in isolated rural areas of developing countries or for medicine teaching

libmylcd is a frame & font rendering library and toolkit designed to provide low level access to 2D hardware via a video framebuffer. Supported devices include SED133x, T6963C, PCD8544, S1D15G10, USBD480, PCF8833, PCF8814, USB13700, S1D15G14.

Implements Lazy Wavelet Transform with Lifting in several variants: 1-D, 2-D, 3-D, integer precision, etc. Sample video compressor, integrated with FFmpeg. OpenCL version is created.

This is an open hardware project. I am making a portable gaming platform using a r8c processor from renesas and a dot matrix lcd display.

Provides access to Belkin Nostromo n50/n52 speedpads as more than simple USB keyboard devices via configuration GUI. Also includes a basic userland linux event interface and both OpenGL and OpenAL modules for video and audio.

This is a sketch for Arduino that allows for the user to have multiple sketches on their Arduino, and then switch between them. For a video go to (coming soon). Requires Arduino 0022 or later to use get Arduino here: www.arduino.cc

Linux/Unix driver development for Syntek Semicon USB2.0 Video device DC-1125, like the one that is found in Asus A6K laptops. The device can be recognized by the usb id 174f:a311 and maybe also be a standalone unit (not integrated).

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

AstroEasyCap is an optimized linux easycap DC60 driver for astronomical purpose. It comes from the great easycapdc60 driver written by rmt1947. Features : integration control using a TTL output, bypass frame processing, gray-scale optimized mode...

A system designed to drive a computer motorized telescope mount to track artificial satellites in real time. Additionally, provides video time stamping using GPS via dedicated hardware solution.

This project is an attempt to provide the Linux community with kernel drivers for two hugely popular DVD playback cards namely DXR3 from Creative Labs and Hollywood Plus from Sigma Designs.

Linux driver for Genesys webcams using the non-UVC-compliant gl860 chip. Pilote Linux pour les webcams Genesys à base de gl860 (non compatible avec UVC). Supported models : 05e3:0503 (in development) and 05e3:f191 (almost complete).