Search Results for "test"

VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.

An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along with FreeRTOS. Please see: LcdTest_ReadMe.pdf or LcdTest_ReadMe.odt. The project is simply a personal record of what has been done, and will not be developed further.

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

liblabpro is a cross-platform C library for controlling and collecting data from Vernier LabPro devices. It is currently in an early work-in-progress stage and is not affiliated with Vernier in any way. As a test case, it also includes a basic program, labpro-console, for communicating with a LabPro using its plaintext command system.

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** Ramps 1.4 | GRBL | Test X axis | X axis | OK working Z axis | Y axis for dual motor Y axis | OK working Y axis | Z axis | OK working Ramps AUX-3 pin 3 | min X | OK working Ramps AUX-3 pin 4 | min Y | OK working Ramps AUX-3 pin 5 | min Z | not tested

A 2.4 GHz wireless development board suitable for Bluetooth experimentation. Open source hardware and software. This project has moved to GitHub - https://github.com/greatscottgadgets/ubertooth

aka: Schlang - A Deliberately Non-Object-Oriented Python Interface to COMEDI COMEDI datatypes and functions are replicated though this interface using the Python ctypes library. This allows the user to interface directly with comedi-lib though the comfortable interface of a Python interpreter.Object-Orientation of the interface is deliberately not provided so the coding style will loosely mimic C -- in this way, Schlang can be used to prototype and debug complex programs that will later...

- A collection of tools for programming an Atmel AVR 8bit Microcontroler. - Circuit decriptions for Atmel AVR 8bit Microcontrolers used for testing.

Growlight facilitates management of all storage devices known to the Linux kernel, from hardware RAIDs to hybrid media to ramdisks to ZFS (indeed, Growlight was initially written to simplify ZFS on Linux). It understands the majority of partition and filesystem types, as well as both software and hardware RAID, LVM, and encrypted disks.

Command line utility for Agilent U1230, U1240 ans U1270 series digital multimeters (DMM). Both Linux and Windows are supported. So far only tested on U1252A, but the utillity do probably work with all the the following multimeters: Agilent U1231A, U1232A, U1233A, U1241A, U1242A, U1241B, U1242B, U1251A, U1252A, U1253A, U1251B, U1252B, U1253B, U1271A, U1272A, U1273A.

Testcard is a SDL/SDL_gfx based monitor test pattern (test card) generator. SMPTE and other test patterns are supported. Future plans include a very basic scripting capability to construct custom test patterns from built in primitives.

A GPU memory test utility for NVIDIA and AMD GPUs using well established patterns from memtest86/memtest86+ as well as additional stress tests. The tests are designed to find hardware and soft errors. The code is written in CUDA and OpenCL.

A Linux driver for RTD DM5408 / DM408 ISA acquisition card. A DKMS module and a dynamic library written from scratch but trying to keep same functions structure of its official Windows 98 driver. I don't recommend it for production. I'm just trying to learn writing drivers for Linux with some interest in Electronics Interfacing.

Serbert is a command line utility which performs a Bit Error Rate Test (BERT) on serial lines for Unix and it's variants. It does this by transmitting bytes, and waiting for their uncorrupted return. Bit error rate testers are used to test and fault

iogen is a lightweight tool that generates heavily fragmented I/O. This tool is intended to test storage stacks under stress and worst case scenarios. Due to heavy fragmentation of the I/O files, it tends to "bypass" caching algorithms in hardware.

A simple user level UDP/IP/Ethernet environment used to test and demonstrate the capabilities of the Linux VFIO driver. Includes drivers for 3 different Ethernet devices.

A small SDL application using OpenGL to test the compatability of Shader Model 3 on nVidia GTX 470

This project contains test software and tutorials for Analog Devices' Blackfin DSP device drivers and system services. See the wiki (in the menu bar above) for more info.

The original Cerberus Test Control System seems to be abandoned by its authors/developers. This project intends to revive it.

Linsanity is a suite of test tools designed to exercise network adapters, opticial storage devices, fixed disks, and audio cards. Each of these tools are "native" plugin applications for the VWM user environement.

MOST4Linux provides a MOST kernel driver supporting synchronous data transfer for PCI hardware and userspace programs to test the driver. The driver can be compiled for Linux 2.6 or for the RTDM which works for the real-time extensions RTAI and Xenomai.

The Cerberus Test Control System is a free (freedom) test suite for use by developers and others to test hardware. Originally developed at VA Linux Systems, it includes a modular test system that allows you to build and integrate your own tests.

Love-Sources is a Linux kernel patchset maintained by a community. Its purpose is to provide a patchset to optimize desktop performance and test new "unstable" features.

SDLJoytest is a program which will allow you to select from all joysticks found on the system (by SDL), and then test that selected joystick or other game controller. SDLJoytest requires X, SDL, libGL & libGLU and, of course, a joystick to test.