Search Results for "shutdown-timer"

An EPICS high resolution timer and alarm clock library for Linux and RTEMS. EPICS is the Experimental Physics Industrial Control System framework. This library supports Linux by utilizing POSIX functions. For RTEMS VME-Bus systems it supports the CPU cards mvme2100, mvme5500 and mvme6500 ("beatnik" board support).

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

...Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).

APMtimer provides a Linux/Unix utility that can permanently Disable, Get, or Set the value of the APM timer found in recent Western Digital 2.5 WD*PVX Hard Disks where the APM setting defaults to 0x60 after a power cycle.

The Project "WDT Driver for LPC1114 on FreeRTOS" was my Project work required for the partial Completion of my Post Graduate Diploma in Embedded System Design at Center for Development of Advanced Computing, Advanced Computing Training School, Pune, India. The Duration of the Project was 15-20 Days wherein we had to develop the driver library for the Watchdog Timer on LPC1114 and incorporate the same into FreeRTOS. The services of the driver are exported using the UNIX like read, write, Open and ioctl system calls used by the various tasks in the FreeRTOS environment to register with the Watchdog service. The Watchdog service itself is a task running as an idle task hook and services the watchdog on behalf of all the tasks that are registered with our driver. ...

This linux/unix utility can be used to remove or set the infamous idle3 timer found on recent Western Digital Hard Disk Drives.

wdt_s2723.c is a Linux loadable kernel module to drive the Watchdog Timer (WDT) on the Tyan S2723 Tiger i7501. The module interfaces with user space via the /proc filesystem.

Linux watchdog timer subsystem

Printer_on is a small program which gives you a warning if you printer is powered on. You can put it in your linux shutdown script, so you'll be notified if your printer is still powered on when you shutdown your computer.