Search Results for "serial console"

Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full support for building desktop applications is planned for future development. ...

cooling home automation with Arduino(C) and Raspberry(front-end, python). Arduino features: - control PC 4-pin fan with PWM; - measure temperature/humidity with DHT11/22; - adjust fan RPM depend on temperature; - console management; - MQTT serial output. front-end features: - data collection form serial port with MQTT - webUI with for sensors parameters

serialconsole (sc) is a minimal terminal program allowing to use one machine to access the serial console of another machine.

Uart32 is a C++ wrapper around the win32 Serial Port API that allows blocking-mode access to the COM port. This library works great for accessing a UART serial port from a background worker thread. It features: a simple c++ class. (temporarily removed for maintainance. Use DLL API Instead) built in per access timeout on data receive. a C-API wrapper that is exportable to C# DLL import class

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

The SCSI Bus Analyzer Solution (scsitrace) is a Linux device driver that can be enabled on-the-fly to capture protocol traces trafficking across SCSI-based storage devices.

The cc3 project provides software for embedded vision systems. Currently, the software runs on the CMUcam3 hardware platform, which is a NXP LPC2106-based board with an onboard CMOS camera and FIFO, MMC interface, serial UARTs, and servo controller.

Utility to calibrate a serial connected touch screen from ELO Graphics. Calibration parameters can be used under X.

A portable library to access braille displays.

A low cost software and hardware KVM over IP and remote Console monitoring solution running on Linux. Secure administration and access to remote keyboard/video/mouse and serial console output. Easily configured and customised to suit user needs.

Serial line sniffer (slsnif). slsnif is a serial port logging utility. It listens to the specified serial port and logs all data going through this port in both directions.

Talkware TIARA, an Openbios/GRUB/PFORTH composite, BIOS replacement. Boots an unmodifed linux kernel from an IDE drive or ethernet, using only 128kb of flash. Works with INTEL/AMD K6/2-450, SiS 530/5595 and 8139 enet. VGA & Serial console supported.