Search Results for "processor"

This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.

...Wi-PWN is a firmware that performs death attacks on cheap Arduino boards. The ESP8266 is a cheap microcontroller with built-in Wi-Fi. It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. Because these management packets are unencrypted, you just need the MAC to address of the Wi-Fi router and of the client device which you want to disconnect from the network. ...

XFreq provides a GUI to monitor the Processor frequencies (including Turbo Boost), the temperatures, C-States; and to alter the operational features of the Intel Core i7 processor. XFreq is also programmed for Core 2 and other Intel 64-bits architectures.

libcpuid provides CPU identification for the x86. It wraps the CPUID and RDTSC instructions in a portable manner and provides a lot of technical info about the processor, such as vendor, core codename, features/instruction sets, cache sizes, and more.

QNICE is a simple 16 bit processor intended to teach the basics of hardware design as well as operating system design. A TTL implementation is planned, a FPGA implementation is available here: http://qnice-fpga.com. Currently there exists a C based simulator and an assembler.

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating...

This is an open hardware project. I am making a portable gaming platform using a r8c processor from renesas and a dot matrix lcd display.

A linux kernel module inspired by i7z that enables unprivileged users to monitor informations like current frequency (including Turbo Boost!) and temperature of Intels Core i processor family.

This research project is a port of the Rice University's Superpages FreeBSD prototype to the Linux 2.6 kernel for IA64, x86-64, and x86-32 processor architectures. See the wiki section for more information.

Processor Hardware Control is a patch for the Linux Kernel which provides a kernel interface for changing the voltage/frequency pairs of processors from userspace.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

This project aims to make GNU/Linux really usable in the LGPL SPARCv8 processor called LEON.

The Ogg Vorbis Player (http://www.xiph.org/ogg/vorbis/index.html) shall be implemented in form of a system-on-a-chip by using hardware/software co-design techniques using prototyping board with the open source LEON processor (http://www.gaisler.com).

This project is a Linux kernel device driver for the MCC (Multichannel Communications Controller) on the Motorola MPC8260 communications processor aka 8260.

This project is to create a linux ATM driver for the Motorola MPC8260, a processor which has built-in ATM SAR support. Based on port of the mpc860sar SourceForge project.

LiteOS is our attempt to write a free OS for calculators known as "TI-68k". TI naturally stands for Texas Instuments while 68k designs the Motorola 68000, in other words the processor running such calculators.

This is a driver for PCI encryption cards using the Hi/fn 7751 encryption processor, including cards from GTGI, NETSEC, Invertex and Hi/fn themselves. Supports all card modes and functions, including encryption unlock and compression.

Linux kernel driver for Texas TMS320C6416 (and TMS320C6415) PCI coupled DSP processors, especially found on Relcom's PCDSP6 card. It is capable for reading and writing the procressors memory, receiving interrupts from the processor, and DMA transfers.

Site dedicated to further understanding and customisation of Digital Photo Frames containing the Sitronix ST2205U processor. This will generally mean the small 1.5" displays found in keyring-style picture frames with resolutions of 128x128.