Search Results for "p-unit"

This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE...

...Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Linux driver for the tablet buttons of Fujitsu Siemens Tablet PCs (Lifebooks P-, T- and U-Series, Stylistic T and ST5xxx). * PLEASE NOTE: the latest release from this project is old and does not build anymore; the driver is maintained in the mainline kernel *

MRP (Multi Rotor Pilot) is Crius AIOP based autopilot for small multirotors. See https://sourceforge.net/p/micropilot/wiki/MRP for more info.

...Revenue will be invested per the discretion of the Facilitator and an advisory board. By contributing to this project, you agree to these terms. [See our Wiki for more information](https://sourceforge.net/p/openshader/wiki/)

...The tools described in this project enable the hardware engineer to develop DPR-FPGA systems more effectively for rapid control system development. For more information, related papers and user guide, please refer to: - https://sourceforge.net/p/prhardware/wiki/Home/ - http://www2.ensc.sfu.ca/research/iDEA/personel/victor_lesau.htm

Query and control the power saving P-States of AMD processors. This allows you to fine-tune, overclock or undervolt your CPU.

Linux/Unix driver development for Syntek Semicon USB2.0 Video device DC-1125, like the one that is found in Asus A6K laptops. The device can be recognized by the usb id 174f:a311 and maybe also be a standalone unit (not integrated).

Porcupine2 is a small wearable sensory unit for logging motion data and doing low-level activity recognition. The project includes electronic schematics for the hardware, software for the microcontroller and client-side software for hardware-interaction.

...The driver provides a standard PC/SC interface to NFC devices supported by libnfc. Note, that this project is currently not actively developed. However, the code has been adopted by the libnfc-Team. See https://code.google.com/p/ifdnfc/source/checkout.

X10 device drivers for Linux creating a /dev device for each X10 unit in the house. This allows command line, script, and program access to the X10 network.This driver currently supports the PowerLinc Serial, PowerLinc USB, and CM11A.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

This software provides a kernel module (and possibly patches) to make using Maxtor (tm) OneTouch(tm) external hard-drives more usable in Linux. It specifically adds usability for the OneTouch(tm) button located on the front of the unit.

This project contains the material discussed in my PhD dissertation, entitled "Hardware/Software Design of Dynamic Real-Time Schedulers for Embedded Multiprocessor Systems." The source code is available in the SVN repository: https://sourceforge.net/p/xrt/code/6/tree/trunk/ and consists in two folders: 1) /X-RT : A portable multiprocessor scheduling framework supporting scheduling periodic real-time tasks according to the G-EDF (Global Earliest Deadline First) scheduling platform. Current version supports major POSIX systems (Linux, QNX). 2) Hardware_GEDF_Scheduler: is a hardware implementation in VHDL (targeting FPGAs) of the G-EDF multiprocessor scheduling policy.