Search Results for "ofn-layer-modes"

This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website.

The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle...

QuickMAN is a Mandelbrot fractal generator with multicore support. ASM-optimized code can reach over 100 billion iterations per second. Features an easy-to-use GUI, realtime pan/zoom, multiple palettes, image logging, and saving in PNG format.

uLan is message oriented multi-master communication protocol for microcontrollers. It uses 9-bit character format for addressing and link control and RS-485 physical layer. More RS-485 cards, converters for PC RS-232 ports and embedded MCUs are supported

...The project comprises a main keyboard PCB (STM32F103), a dynamic module (STM32F405) with additional features like an e-ink screen, OLED display and a haptic/motorized knob, a base/dock module with USB hub functionality, and other supporting PCBs. The firmware includes high-speed scanning of keystrokes, RGB lighting control via SPI/DMA, HID keyboard enumeration, multiple key-layer mapping and non-volatile configuration storage. The hardware architecture is modular: the keyboard, dynamic module, and base connect via FFC/contacts so you can swap out the dynamic side module or bottom. The documentation includes 3D models for casing, firmware binaries, and tools for customization.

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports...

VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.

A simple fan control program. Read temperatures, check them against configured limits and switch to appropriate (also pre-configured) fan level. Requires a working thinkpad_acpi or any other hwmon driver that enables temperature reading and fan control from userspace.

Compatibility library/layer for USB (serial-type) to GPIB interface, a C-based library with Linux-GPIB and NI-type library calls such as ibrd() and ibwrt(). Includes LabView VIs modeled on those in the standard 488 interface l Works with/compiled for Linux and Windows

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie

...This open-source library facilitates research and development in approximate computing at higher abstraction levels, and to facilitate reproducible research and comparisons. In case of usage, please refer to our publication: Muhammad Shafique, Rehan Hafiz, Semeen Rehman, Walaa El-Harouni, Jörg Henkel, "Cross-Layer Approximate Computing: From Logic to Architectures", Design Automation Conference (DAC), 2016. Contributors: Authors, Vanshika Baoni, M. Abdullah Hanif http://ces.itec.kit.edu/lpACLib.php

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

USB for Real-Time aims at providing a hard real-time capable implementation of an USB stack on top of Linux/Xenomai. It comes with a stack core and an UHCI host controller drivers. Future work will deal with a EHCI (2.0) and various high-layer drivers.

LCD-Linux is a Linux software abstraction layer to drive LCD alphanumeric displays. It features complete VT102 console emulation and aims to be as general and flexible as possible. Drivers for specific LCD controllers can be easily written.

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

Full functional PS/2 keyboard on Atmega16, works with simple circuits, and fully customizable. Performs really great! - ps2 / keyboard / ps2avr / controller / avr / hardware

The Cell Messaging Layer is an extremely fast, MPI-like communication library for clusters of Cell Broadband Engine processors. With it, any Cell synergistic processing element (SPE) can communicate directly with any other SPE, even across a network.

Linux driver for the Philips SRM 7500 remote control. This remote control uses a USB dongle implementing IEEE 802.15.4 MAC layer for bidirectional RF communication which also allows controlling the remote's small display.

Module linux kernel for upload chaosnet protocol into network layer. Server and client programm for share with lisp machine data space. Api interface for make program and service with chaosnet protocol.

The Isis OS Project Is a Controlled Project to Develop An Advanced Modern Operating System!

"flashmanager" is a software to manage the flash partitions from user-space. This uses an underlying driver layer for interaction with the flash device.

ULLA allows developers of network aware applications to access data from device drivers similar to the Wireless Extensions on Linux. However, its new design simplifies the API syntax and expands the access to all wireless technologies such as GSM, BT.

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits