Search Results for "liblpsolve55.so"
Sort By:
Showing 33 open source projects for "liblpsolve55.so"
View related business solutions-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
1
Tasmota
Alternative firmware for ESP8266 with easy configuration
...Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits unexpected behaviour for your device and configuration, you should upgrade to the latest development version instead to see if your problem is resolved as some bugs in previous releases or development builds may already have been resolved. Single binary firmware. ... -
2
ttf-gdos
TTF-GDOS is an Atari GDOS replacement that uses true type fonts
TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. ... -
3
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
...The firmware includes high-speed scanning of keystrokes, RGB lighting control via SPI/DMA, HID keyboard enumeration, multiple key-layer mapping and non-volatile configuration storage. The hardware architecture is modular: the keyboard, dynamic module, and base connect via FFC/contacts so you can swap out the dynamic side module or bottom. The documentation includes 3D models for casing, firmware binaries, and tools for customization. -
4
L-ink_Card
Smart NFC & ink-Display Card
L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card. Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. Because it uses e-ink, the card can display static content with minimal power drain, making it practical for real-world card use. ... -
Cloud tools for web scraping and data extractionAutomate web data collection with cloud tools that handle anti-bot measures, browser rendering, and data transformation out of the box. Extract content from any website, push to vector databases for RAG workflows, or pipe directly into your apps via API. Schedule runs, set up webhooks, and connect to your existing stack. Free tier available, then scale as you need to.
-
5
Gammu
Cellular manager for mobile phones/modems
Gammu is a cellular manager for mobile phones/modems. It contains libraries and functions for ringtones,logos,phonebook,SMS,etc. (used by external software), a command line version (with backup/restore) and SMS gateway (with MySQL and PostgreSQL supp -
6
csensors
GUI for linux hardware sensors information
GUI for linux hardware sensors information exported via /sys . It displays temperature of cores,motherboard,fan speed, battery status and so on. -
7
MSX Disk Interface Emulator
A Interface to adapt modern SD Card to the old MSX computers
This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE... -
8
Wi-PWN
ESP8266 firmware for performing deauthentication attacks
...It contains a powerful 160 MHz processor and it can be programmed using Arduino. A deauthentication attack is often confused with Wi-Fi jamming, as they both block users from accessing Wi-Fi networks. The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. Because these management packets are unencrypted, you just need the MAC to address of the Wi-Fi router and of the client device which you want to disconnect from the network. You don’t need to be in the network or know the password, it’s enough to be in its range. ... -
9
Cortex GNAT Run Time Systems
Supports writing Ada software for Cortex-M3, M4F boards
DEVELOPMENT OF THIS PROJECT HAS MOVED TO GITHUB, at https://github.com/simonjwright/cortex-gnat-rts This project contains various GNAT Ada Run Time Systems (RTSs) targeted at Cortex boards: so far, the Arduino Due (http://www.arduino.org) and the STM32F4-series evaluation boards from STMicroelectronics (http://www.st.com). It is intended that releases will allow the development of proprietary software (by the use of the GCC Runtime Library exception for project-developed code, and by only using manufacturer’s software where the same permission applies). -
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
10
PUB! Programmable USB Button
Program a button to send keystrokes to your computer
PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit. -
11
IR-controller
STM-32 code for IR-spectrometer management
This is a project of IR-spectrometer controller. It based on STM32F103 chip with a lot of peripheral devices (1-wire thermometers, stepper motors, platinum thermistors and so on). In future I hope to add here schematics of full control system for this device. -
12
IRK! Infrared Remote USB Keyboard
Control your computer with an IR remote
This is an open-hardware Infrared Remote Controlled USB keyboard, without keys, implemented using a PIC micro-controller and MikroC. IRK! enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on... -
13
Schlangenaufbewahrungsbehälter
A Deliberately Non-Object-Oriented Python Interface to COMEDI
...This allows the user to interface directly with comedi-lib though the comfortable interface of a Python interpreter.Object-Orientation of the interface is deliberately not provided so the coding style will loosely mimic C -- in this way, Schlang can be used to prototype and debug complex programs that will later be written in C. -
14
VisualVNC
VisualVNC is a connector between virtual network and physical network.
...A virtual network mainly refers to the topology created by GNS3 (Graphical Network Simulator, a popular network simulator), the physical network means the real machines or virtual machines (created by VMware, virtualbox and so on) which are running Windows. -
15
dmmutils
Linux and Windows utillity for Agilent U1230, U1240 and U1270 DMM
Command line utility for Agilent U1230, U1240 ans U1270 series digital multimeters (DMM). Both Linux and Windows are supported. So far only tested on U1252A, but the utillity do probably work with all the the following multimeters: Agilent U1231A, U1232A, U1233A, U1241A, U1242A, U1241B, U1242B, U1251A, U1252A, U1253A, U1251B, U1252B, U1253B, U1271A, U1272A, U1273A. -
16
ttyproc provides for a simple api to parse certain information found in /proc/tty. At the moment it is capable of finding usbserial devices and returning a device node path so that a file descriptor may be obtained.
-
17
The Xbox Linux Project aims to privide a version of GNU/Linux for the Xbox, so that it can be used as an ordinary computer. Linux should make use of all Xbox hardware and allow to install and run software from standard i386 Linux distributions.
-
18
rl-module is a linux kernel module that drives the USB missile launcher made by Dream Cheeky. With this module you can move it in all the six directions. It handles correctly interrupts so it stops motors when it reaches the mechanical contraints.
-
19
This Project was born on friday, 13th of February. The target of this project is to edit the existing Wireless LAN Realtek RTL8180L-Wlan-Modules, wich works only with RedHat Linux 8 and 9, so that you can use them on all distributions and kernel versions
-
20
A program, or daemon for Linux, which convertes incoming joystick data to mouse data, so that you can use your joystick/joypad as a mouse device in X.org, gpm or any other program that needs mouse data (even games).
-
21
Intent is to develop a kernel module and print driver for the Lexmark X85 All-in-One colour scanner/printer/copier. This kit hopefully will be generic enough to support most/all AIO devices from Lexmark or be easily adapted to do so.
-
22
The openwince project collects free (open source) software tools, modules, applications, drivers, and so on for Windows CE platform developers. Some of the modules are usable outside Windows CE development environment and are platform independent.
-
23
Help port the tulip driver from free/net/openbsd to Darwin OS. So far the driver is written to the ADMtek 985 clone chipset and the PNIC 82c169 chipset. Due to IOKit's object-oriented design, the code can be easily subclassed to support new chipsets.
-
24
This is the Solaris USB camera drivers project and it will first target on the OV511 cameras based on the Linux ov511 driver. NEW: USB Video Class on Solaris. See the project forum for updates!
-
25
This program allows you to use your PalmOS device as a LCD status display for your computer! You can display system stats (such as: CPU load graphs, CPU temperatures, free disk space), news alerts, stock indexes, graphs, etc. Can be used with most LCD so
