Search Results for "gnu radio"

mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.

Virtual-Audio-Pipeline:- A WDM Virtual Audio Cable/Device It is a WDM based Virtual Audio Device Driver, can be used as a Virtual Sound Card. No Hardware is requred. Can be used as an Audio Loopback Device. The following are its Features 1. Supports PCM, WAVEEXTENSIBLE format 2. Supports 8 to 32 bit sample format 3. Supports 8000 to 192000 Hz Sample rate 4. Supports upto 7.1 surround sound 5. Supports Windows MME, DS, KS, WASAPI 6. Can be used with DAWs 7. It have Volume...

This project is a Linux Kernel 2.4/2.6/3.x module/console program for changing wireless radio status on the Fujitsu Siemens AMILO A1655G laptop.

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

This is a Linux driver for ThinkPad laptops, written by Borislav Deianov and Henrique de Moraes Holschuh. It aims to support various features of these laptops which are accessible through a ThinkPad-specific ACPI framework. The newest version is available in the latest version of the Linux kernel.

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

A library for interacting with Maxstream XBee Radio Modems.

This project is here to help users change the status of their wireless cards radio on laptops which do not have a hardware based wireless radio switch. We have a laptop support table, and linux modules for some Averatec and Packard-Bell hardware.

pleXus is a framework that allows you to control multiple programs (modules) by means of events, messages and simple scripting. We use it to build things like a remote controlled radio/mp3box or to control external hardware. (like robots or a house)

This project is a Linux Kernel 2.4/2.6 module/console program for change wireless radio status on Fujitsu-Siemens AMILO M 7440 laptop

Linux driver for rtl8180 wlan card with philips, maxim or gct radio(other in future).Still under development!(Use at your own risk!).Managed and monitor mode working.Ad-hoc roughly working,WEP support with open authentication and promisc mode are ok also

The Simple Software Radio peripheral project is dedicated to developing and supporting open source software defined radio software and hardware. The project places an emphasis on thorough documentation and elegant modular design.

Please note, we've moved to gnuradio.org.

The Simple Network Enhanced Zulu-time Device (SNEZ-D) or Aftermarket CHU Decoder (A-CHU) is a complete radio-to-interface time reference in-a-box with software that decodes the CHU radio signal, and can be interfaced to NTP servers.

A portable library to control the ICOM PCR-1000 computer controlled general purpose radio receiver and gui front ends for X, Aqua, and windows32

Support for WiNRADiO radio receivers on Linux and other Unices.

M4DSP is a QRP (low power) hamradio digital signal processing (DSP) tranceiver using a comprehensive yet powerfull Cortex-M4 MCU from STMicroelectronics. The main goals are: low cost, low power consumption, IPhone-like size & weight, QRP CW RX & TX, SSB/AM/FM RX-only, digital modes by demand, GUI with TFT + touchscreen, waterfall spectrum, CAT communication link via low-speed USB, pure SDR-like mode via high-speed USB, one or more hamradio bands (160-10 m), optional support for general...