Search Results for "drive"

smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.

...Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").

TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. ...

hdparm - get/set ATA/SATA drive parameters under Linux

library to drive several displays (with built-in controllers or display modules, a.s.o.)

An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along with FreeRTOS. Please see: LcdTest_ReadMe.pdf or LcdTest_ReadMe.odt. The project is simply a personal record of what has been done, and will not be developed further.

This is an open source project that aims to create a MSX cartridge that acts as a old disk drive interface but in fact it will be accesing a modern SD Card. For the MSX it will be as if there is a magnetic disk drive with a real magnetic disk but for real it will be accessing a .dsk file inside a sdcard. Development tools used are: - Kicad version 2013-07-07 - Microchip XC8 v1.21 (free mode) - Micrchip MPLAB X IDE v1.90 - Altera´s Quartus Web Edition 11.0 UPDATE 2014-11-05 =============== Now it is working and the SVN repositories has it all: Schematics, PCB layout, firmware for the CPLD and the firmware for the MCU. ...

...The source is written in C and requires the AVR Studio 5 IDE from atmel.com/avrstudio. Hardware is commercially available. Imagine plugging in a seemingly innocent USB drive into a computer and installing backdoors, exfiltrating documents, or capturing credentials. With a few well crafted keystrokes anything is possible. If only you had a few minutes, photographic memory and perfect typing accuracy. The USB Rubber Ducky injects keystrokes at superhuman speeds, violating the inherent trust computers have in humans by posing as a keyboard. ...

HWSensors is a software bundle that includes drivers and applications that allow you to access information from hardware sensors available on your Mac. FakeSMC is an open source SMC device driver/emulator developed by netkas (http://netkas.org/). NOTE: FakeSMC & Plugins starting from v915 provide additional sensors information to HWMonitor then running on Macs. By installing FakeSMC on real Mac you should consider you know what you are doing and how to recover your system if something...

Sample code demonstrating how to use OmniDriver to drive Ocean Optics full range of spectrometers from C, C++, C#, Java, LabVIEW, Delphi, MATLAB and more.

The project contains the following modules: * Main Controller Module which is responsible for scheduling and switching the water pumps, monitoring the water level and temperature, and reading the Soil Moisture Sensors. The module has a 4 line alphanumeric LCD that makes the system easy to use. * Sensor Controller Module is attached to the Main Controller Module via RS232 interface. This module is the master controller for the Soil Moisture Sensors and also contains a Dallas 1-Wire...

LinuxCNC controls CNC machines. It can drive milling machines, lathes, 3d printers, laser cutters, plasma cutters, robot arms, hexapods, and more.

A virtual floppy drive that mounts image files (*.img) as new browseable computer resources. Tested from WinXP (32bit) to Win7 (64bit). Derived from: https://sourceforge.net/projects/vfd/

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

Tool for controlling the special features of a "U3 smart drive" USB Flash disk.

LCD-Linux is a Linux software abstraction layer to drive LCD alphanumeric displays. It features complete VT102 console emulation and aims to be as general and flexible as possible. Drivers for specific LCD controllers can be easily written.

This is a virtual floppy drive for Windows NT / 2000 / XP / 2003 / Vista / Windows 7 (both 32-bit and 64-bit versions)

A system designed to drive a computer motorized telescope mount to track artificial satellites in real time. Additionally, provides video time stamping using GPS via dedicated hardware solution.

USB Radio has the goal to develop both the hardware and the software for a USB connected radio. A user should be able to control the radio from the computer and record and save broadcasts to hard drive.

DVD/CD UDF disc drive tools, esp. for the Iomega RRD (aka Iomega REV) drive. Usability patches for UDF mkfs and fsck. Commentary for the lk MMC and UDF source code. cvs co tarballs for firewalls that defeat CVS. Links, FAQ's, troubleshooting hints.

AHN will be a home automation controling software. It is intended to drive an usb to X10 power line carrier interface that is a part of the project.

wdt_s2723.c is a Linux loadable kernel module to drive the Watchdog Timer (WDT) on the Tyan S2723 Tiger i7501. The module interfaces with user space via the /proc filesystem.

cdrom is a small C utility for controlling the CD-ROM drive (eject and speed) for GNU/Linux. It automatically mounts and unmounts the devices when used.

Linux/i386 kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. A fast disk copier included.

The main purpose is to develop a Linux stepper motor driver module to drive two unipolar stepper motors using the parallel port. This driver has the task to enable a home-made robot to move around and uses the tank-principle to move and turn.