Search Results for "connection"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full...

GTK PPP is an easy to use graphical dialup connection configuring and dialing tool with system tray icon support. It uses GTK+ for its graphical interface and integrates well in GNOME desktop environment. It also uses WvDial dialer as its backend, providing simple configuration via config files. You can also use plain wvdial if you don't have X running. GTK PPP is GTK3 fork of GNOME PPP.

...It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?...

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit.

The Gigaset 3070 isdn is the ancestor of a family of ISDN DECT base stations allowing the connection of a PC via USB or DECT. This project is building the Linux support (drivers and frontend utilities) which Siemens neglected to provide.

Libre Software to manage audio/video connection from a PC to a libre hardware real time stethoscope hardware, developed to allow doctors make a remote diagnose in real time in isolated rural areas of developing countries or for medicine teaching

USB programmer for Atmel AVR controllers with additional direct connection between the running target device and PC for logging and controlling purposes - no need for extra COM port at PC side and UART at AVR-controller side.

Expansion card for 8 bit computer Sharp MZ-800. Connection to SD / MMC card with FAT16 filesystem. Emulated FD controller. MZF repository. This project is already stoped. Please see the MZ800 Unicard 2nd generation https://sourceforge.net/projects/mz800ukp1/

This is a programmer software+hardware+firmware for Atmel AVR family (and more), using USB connection.

Monitoring/controlling tools and libraries for mCubed's T-Balancer family of devices. Connection is done via rs232 conversor port.

Eppnics: Electronic parallel port network interfaced control system. Eppnics allows you to control electronic circuits connected to a parallel port via a TCP/IP connection.

A simple utility for uploading/downloading files to/from Memory-iButtons produced by Dallas Semiconductor. Compatible devices are DS1993, DS1995 and DS1996. Connection to the iButtons is through the DS9097U-9.