Search Results for "graphical data"

GSmartControl is a graphical user interface for smartctl. It allows you to inspect the hard disk and solid-state drive SMART data to determine its health, as well as run various tests on it.

GXSM -- Gnome X Scanning Microscopy: A multi-channel image and vector-probe data acquisition and visualization system designed for SPM techniques (STM,AFM..), but also SPA-LEED/LEED/LEEM data analysis. A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports...

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &...

Graphical PIM for the Timex Data Link USB watch in Linux. Aims to be a complete replacement for the Windows client. Supports importing for various common formats.

GXGPRS offers an easy way to send data using GPRS connection. General Packet Radio Service (GPRS) enabled networks offer always-on, high capacity, Internet based content and packet based data services.

VME Data Acquisition System for the Experimental Nuclear Physics Department of the ATOMKI

Linux drivers to allow ALSA audio applications to communicate over the IEEE1394/Firewire bus. This allows audio and midi data to be shared between multiple workstations and audio devices on a 1394 network, using the IEC 61883-6 protocol

This project is no longer active! A visual modelling tool for embedded software systems, e.g. for automotive applications. Main features include: hierarchical design of system functions, mapping to ECUs, fault analysis. Written in C++ on Windows.

This work is developed for my thesis in computer science at University of Bologna under the guide and support of my supervisor prof. Renzo Davoli: it is a software oscilloscope, more precisely a program for data visualization coming from "microscope"

Modern CD-ROM drives tend to be noisy and spin down too quickly. If your drive supports it, CD-ROM Tool can slow your drive down and keep it ready to read data for longer periods of time.

Based on tom and roland from wingmanteam work. This is a tool that log the usb data exchange between hardware and device driver!

PROJECT IS DISCUNTINUED This project is about to contain information how to write data like boot loader into various flash devices on diffrent CPUs trough JTAG interface

Firmware and user interface code for a USB-based digital oscilloscope.

A device server inteded for (but not limited to) use with 3D input devices (like dynasight, Polhemus FASTRAK, motionstar and the magellan spacemouse). Devices can be configured via a remote TCP connection. Device data is sent to registered clients via