Search Results for "get"

This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE, install libraries 561, 562, and 563 with "platformio lib install", adapt the WeatherStationDemo.ino file to your needs. ...

Customize and control all your Razer devices from one powerful platform. Whether you’re remapping buttons, creating macros, or fine-tuning performance settings, Synapse provides every tool you need to personalize your gear to your playstyle.

This small header file is pure C and can be used in any C/C++ program to get memory information about the current process. Did you ever try to monitor a process in a task manager or similar and wondered why the memory doesn't go down even if your program freed all the memory? Then this small library is right for you! It is even capable to observe a difference before and after a call to free() or delete.

Displays battery charge indicator in the system tray. NOTE: 1) Requires Visual C++ 2010 run-time environment installed. You can get it here: http://www.microsoft.com/en-us/download/details.aspx?id=5555 2) 100% charge shown as 99%, because there is two digit positions. 3) Status icon updates every 30 seconds. There is no way to change this interval other than re-compile source code. 4) Tested on Windows XP SP3. Works perfectly. If you have any troubles using this software, please contact me via e-mail immediately.

Win32 program that examines optical and removable media drives on a computer and returns information about the media and drive characteristics.

Barracuda is a circuit board analyzer that analyze PCB and make sure the new boards doesn't contain errors Barracuda has now his first release, The error detection works fine, but it require to much calibration to get good pictures.

Feel pictures free of charge - SeebyTouch is the unique open source tactile vision substitution system available! Using the software and the construction manual it is possible for everyone to get pictures over the tactile sense! - Blindensehersatzsys

Kyro Linux Tools allows owners of Kyro 1/2 graphics cards to configure and tweak it to get the most out of it

...You can send the arduino microcontroller a value from 0 to 1023 and the arduino will control the motor speed and direction to reach your target value. The PID algorithm will insure that the motor will not get into hold vibrations if the pot has some influences. This article will describe where you have to take attentions and what you have to setup to get the best results. The project will help you to connect any arduino motor shield or other H-Bridges to the controller because it is open source and the output pins can therefor be changed as you like. ...

WDOL, or the "WDDM (Windows Display Driver Model) Drivers On Linux" project targets to get Vista WDDM drivers running on Linux. The idea is that its possible to load Windows drivers and emulate WDDMs interface, and, in turn support DirectX 10.