Search Results for "esp32"

Wifi & Bluetooth driven, LoRaWAN enabled, battery-powered mini Paxcounter built on cheap ESP32 LoRa IoT boards. Paxcounter is an ESP32 MCU-based device for metering passenger flows in real time. It counts how many mobile devices are around. This gives an estimation of how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC addresses. The intention of this project is to do this without intrusion in privacy: You don't need to track people-owned devices if you just want to count them. ...

...A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most Arduino platforms. ESP32 support for using both RMT and i2s. RMT timing currently is sensitive to high interrupt frequency due to issues in the Core. There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. ...

This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in...

This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each...

Blynk is the most popular Internet of Things platform for connecting any hardware to the cloud, designing apps to control them, and managing your deployed products at scale. With Blynk Library you can connect over 400 hardware models (including ESP8266, ESP32, NodeMCU, all Arduinos, Raspberry Pi, Particle, Texas Instruments, etc.)to the Blynk Cloud. With Blynk apps for iOS and Android apps you can easily drag-n-drop graphic interfaces for any DIY or commercial project. It's a pure WYSIWG experience, no coding on iOS or Android required. Hardware can connect to Blynk Cloud (open-source server) over the Internet using hardware connectivity available on your board (like ESP32), or with the use of various shields (Ethernet, WiFi, GSM, LTE, etc). ...

Blinker library for embedded hardware. Works with Arduino, ESP8266, ESP32. When we learn new embedded hardware, we usually started with the sketch Blink. We think Blink is the hello world of embedded hardware. We aim to build an easy learn IoT solution project, which is like Blink a led. So we named this project blinker with this inspiration. blinker is a cross-hardware, cross-platform solution for the IoT.