Search Results for "connect"

...Hardware can connect to Blynk Cloud (open-source server) over the Internet using hardware connectivity available on your board (like ESP32), or with the use of various shields (Ethernet, WiFi, GSM, LTE, etc). Blynk Cloud is available for every user of Blynk for free. Direct connection over Bluetooth is also possible. Check the included examples on how to use different types of connections (transports) and explore Blynk features.

...Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. Complete configuration by web browser (Station or Access point) or by Serial/telnet commands.

...By using a simple scripting language, it's easy to make BadUSBs type whatever you want. With the WiFi Duck, you can simply connect via WiFi to manage all scripts from within a web interface. This means that, unlike other BadUSBs, you don't need to install an app, log in, compile or copy scripts to an SD card.

microTone Module is analog interface to connect microcontrollers or digital logic systems with PCs. This interface use PC sound card’s audio output terminal to send commands to external hardware systems.

Goal is to develop a client program for Linux to connect to a "Wireless USB hub" over Ethernet. Main focus in first stage is to connect to a device produced and sold by Medion (MD-86097).

Usbautostart is an utility performs autoplay for usb mass storage device. This programm launch automatically an application from a device when you connect its to pc, and close all application, running from device, when you try the "safety remove" on it

Motorola a1000 jni gps interface Connect java to motorola a1000 AGSP using jni dll

A hardware description language and simulation tool to describe hardwares based on logic gates. The hardwares described can have the facility to connect to other programs or the devices can be written in C using the program as a library.

...The PID algorithm will insure that the motor will not get into hold vibrations if the pot has some influences. This article will describe where you have to take attentions and what you have to setup to get the best results. The project will help you to connect any arduino motor shield or other H-Bridges to the controller because it is open source and the output pins can therefor be changed as you like. You can upload a better modified version and improove this article by contacting me. With some pin changes you can port this code to other arduino boards.