Search Results for "build"

This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save.

This is a work in progress split-flap display. Each module can flip between 40 unique characters: letters, numbers, and a few symbols. Multiple modules fit perfectly alongside each other to build bigger displays. The primary design goal was to make something that's possible to fabricate at home in small or single quantities and can be customized and built by an intermediate hobbyist at a reasonable price. This meant using widely available materials and avoiding any tooling with a high upfront cost. Following that philosophy, the design uses store-bought vinyl stickers for the letters, is driven by an ubiquitous and cheap 28BYJ-48 stepper motor, and uses common PVC ID badge cards cut to shape for the flaps (though custom die-cut flaps are also available). ...

Wifi & Bluetooth driven, LoRaWAN enabled, battery-powered mini Paxcounter built on cheap ESP32 LoRa IoT boards. Paxcounter is an ESP32 MCU-based device for metering passenger flows in real time. It counts how many mobile devices are around. This gives an estimation of how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC addresses. The intention of this project is to do this without intrusion in privacy: You...

The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling.

Armadeus is an OpenSource Hardware and Software project based on an ARM core (Freescale i.MX) and Linux. You can consult our wiki at http://www.armadeus.org to join our non profit association or our commercial website at http://www.armadeus.com .

...Works with Arduino, ESP8266, ESP32. When we learn new embedded hardware, we usually started with the sketch Blink. We think Blink is the hello world of embedded hardware. We aim to build an easy learn IoT solution project, which is like Blink a led. So we named this project blinker with this inspiration. blinker is a cross-hardware, cross-platform solution for the IoT. It provides APP, device, and server support, and uses public cloud services for data transmission and storage. It can be used in smart homes, data monitoring, and other fields to help users build Internet of Things projects better and faster.

Display power off utility. Powers off desktop/notebook display and optionally locks workstation. Can be set as a screensaver. Can be launched as a system tray icon application.

A user-friendly open-source project to learn about keystroke injection attacks or ‘BadUSBs’. By emulating a USB keyboard, BadUSBs can gain full access to a computer in a matter of seconds! Unlike with other BadUSBs, you don’t need to install an app, log in, compile, or copy scripts onto an SD card. You simply connect via WiFi to manage all your scripts from within the web interface. This tool is intended to be used for testing, training, and educational purposes only. Never use it to do harm...

...We're here to help people who'd like to create original and affordable sensors and actuators based on components like Arduino, ESP8266, Raspberry Pi, NRF24L01+ and RFM69. Does it sound complicated? Don’t worry, we’ll explain everything. We provide easy-to-follow build instructions, ready-to-use code examples, and adaptable open-source hardware designs. All of this runs on the MySensors software library for secure communication that has been battle-tested with more than 20 of the leading home automation controllers on the market. So, join in, have fun and create your own connected home experience! ...

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

This is a programmer software+hardware+firmware for Atmel AVR family (and more), using USB connection.

The Yakko project is a home automation system. It defines a new protocol implemented as firmware running in AVR atmega microprocessors. The goal is to build a method to make logical connections between hardware devices such as lamps, switchers and so on.

LCD Builder is a program where you can freely compose different information (CPU, Memory, Uptime etc.) with the help of a graphical user Interface. After composing the information you can easily display them on an external lcd (liquid crystal display

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

FreeSP is an infrastructure for programming platform-independend online signal processing applications. Ports to specific platforms (like DSPs and microcontrollers) are made by simply exchanging the freeSP System-module.

This project intends to build a complete CallerID-function for home- or small buisniess environments. It depends on simple hardware which everyone can build. It will present the incomming call's number on every workstation on the network.

HericomMesh is a linux distribution for the Linksys WRT54G. This is a replacement firmware for this low cost router. The Hericom Mesh uses a public networking standard AODV, to build the mesh.

PicBurner is a complete solution for programming Microchip PIC microcontrollers and maybe other microcontrollers and EEPROMs. The software will be build in Borland DS 2006, personality C++ and hardware will support RS232 and USB interfaces.

POSIX API for Win2K-XP. Mainly implemented in the driver. Included: write-on-copy fork, threads, mutexes, spins, condvars, rwlocks, signals ... Signals/cancelation interrupt all waitable syscalls, NT syscalls are automaticaly restarted.