Search Results for "basic for linux"

This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards....

The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to...

Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.

Smartcard access lib for Arduino based boards connected directly to a smartcard. This is currently a work in progress. Currently it is possible to communicate with a smartcard directly connected to a Arduino board or connected via a TDA8024T (or compatible chips. e.g. DS8024). All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card...

The BIOE system is an open-hardware platform to bridge the gulf between open-source CACSD systems like Scilab and the physical plant. It is intended for engineers, students, hobbyists, and anyone interested in automation and mechatronic.

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface...

This project's goal was to develop an open source firmware for Sinus 154 DSL Basic SE and similar AR7 based devices. Projektziel war die Entwicklung einer freien Firmware für Sinus 154 DSL Basic SE und vergleichbare Geräte mit AR7-Prozessor.

This program was born as a parody of another *-Z utilities like CPU-Z or GPU-Z. It shows some basic information about OpenCL-enabled GPUs and CPUs.

New programming language for SPS devices like Amtel Controller . The basic element of this language will be small Moduls of Code which work parallel (Multitasking). A Module can work indepent or with addiction to other Moduls.

Open DMX USB interface: this project created by ENTTEC (www.enttec.com) is an open source hardware and software DMX512 interface

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

Modular EtherCAT master stack targeting real-time industrial control. Configurable anywhere from a lean-and-mean basic stack to a full-fledged EtherCAT master.