Search Results for "basic"

...Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards. Reads SNES roms and reads/writes save games from and to the SNES cartridge. Supported cartridge types so far, LoRom, HiRom, ExHiRom, DSP, SuperFX, SuperFX2, SDD1, CX4, SPC7110, SA1 (last two chips need Adafruit Clock Generator). Reads and writes SNES Satellaview 8M Memory packs (BS-X cartridge and Adafruit Clock Generator needed). ...

The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to...

Simple program that displays information about CUDA-enabled devices. The program is equipped with GPU performance test.

...Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte. - Support class for SLE4432 / SLE4442 / SLE4441 and SLE4440 compatible sychron smartcards. Mostly used for secure data storage. Open points: - Error handling not completly implemented. No retries if parity error is found. - Setup of communication parameters from ATR - T=1 communication not supported (Still possible via "raw" sendBytes(..) / receiveBytes(..))

microTone Module is analog interface to connect microcontrollers or digital logic systems with PCs. This interface use PC sound card’s audio output terminal to send commands to external hardware systems.

This project is a simple USB-to-GBIB (IEEE488) interface from PC to GPIB-based devices.

The BIOE system is an open-hardware platform to bridge the gulf between open-source CACSD systems like Scilab and the physical plant. It is intended for engineers, students, hobbyists, and anyone interested in automation and mechatronic.

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

This project's goal was to develop an open source firmware for Sinus 154 DSL Basic SE and similar AR7 based devices. Projektziel war die Entwicklung einer freien Firmware für Sinus 154 DSL Basic SE und vergleichbare Geräte mit AR7-Prozessor.

This program was born as a parody of another *-Z utilities like CPU-Z or GPU-Z. It shows some basic information about OpenCL-enabled GPUs and CPUs.

New programming language for SPS devices like Amtel Controller . The basic element of this language will be small Moduls of Code which work parallel (Multitasking). A Module can work indepent or with addiction to other Moduls.

This project hosts a framework for lab automation based on COM. Generic interfaces for handling manufacturing and research automation are included. Drivers for hardware also included as developped; hardware appears as a COM object.

Open DMX USB interface: this project created by ENTTEC (www.enttec.com) is an open source hardware and software DMX512 interface

SoftDash PC allows realtime control of the Connect2Car MFC controller unit installed in a vehicle. Softdash PC can communicate with the MFC hardware either via a serial connection or a Bluetooth Connection. This project allows for open ended expansion.

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.

C++ Runtime Library for Windows Kernel Device Drivers. This provides basic support for the use of C++ in kernel mode drivers, when using the Microsoft WDK.

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

Motherboard Monitor .NET is a .NET class library written in C# able to communicate with Motherboard Monitor using shared memory, it can read system temperatures, CPU & fans speed, voltages, add custom sensors, set sensors alarms and manage system events.

MIDIIO2K / MIDIFL2K OCX Midi input, output, & file processing*. Versatile/reliable/accurate/optimized for VB** and most sound cards***. Based on old tools & demos (MIDIIO32 / MIDIFL32) by Mabry, Mike LeVoi, Joseph Balogh. Based on unrelated features****.

A couple of tools for enhance the capabilites of the \"Movistar TSM100 GSM/GPRS smartphone\". It includes soft for adding your own MIDI melodies, images, and Java applications to the TSM100 telephone.

Modular EtherCAT master stack targeting real-time industrial control. Configurable anywhere from a lean-and-mean basic stack to a full-fledged EtherCAT master.

An eco-system of RTSC-based embedded C/C++ components that furnish a rudimentary hardware abstraction layer comprising basic I/O and threading services which can support a wide-range of embedded platforms.