Search Results for "speed"

...A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via github.com/pyzahl/Gxsm4 (source code) or as binary for Ubuntu on https://launchpad.net/~totto/+archive/ubuntu/gxsm

Cpuspeedy is simple and easy to use program which allows you to change the clock speed and voltage of the CPUs on the fly, using the Linux's CPUFreq driver. Use it and you should save battery consumption and reduce the temperature of your laptop.

...It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?...

This tool let's you control the frequency and fan settings of your AMD/ATI video card. It depends on the proprietary AMD/ATI Catalyst display driver and makes use of the AMD Display Library (ADL).

acers3fand is a script which controls your Acer Aspire S3 Ultrabook fan speed by cpu temperature. It is designed to work with Intel Core i5 CPU but might work with other cpus as well.

Control- and Status-Utility for Tr*ndCh*p-based ADSL-modems. It allows to access the devices' console-service and retrieves their current staus. For example those TC3084 devices are supported: Lucent CELL 19A-BX, Speed Modem 50B(+) and 200 by Arcor.

A high speed Linux kernel driver for the FTDI FT245BM USB chipset.

Quiet Fan implements a control loop to set your CPU or motherboard fan speed. This means that it uses the lowest possible fan speed to keep a target temperature, and eliminates damaging hardware temperature oscillations.

AOT4L is a Qt4 based monitor and overclocking tool for ATI (TM) based video cards under Linux OS which loads into system tray and stay runing all the time. It has support to read and change fan speed, memory and core clocks, thermal sensor values.

An high speed Linux device driver for the digital parallel I/O board DIO32HS produced by National Instrument. Currently we tested only computer input, were we get more than 5.5Mbytes/sec on a 32 bit wide bus.

The SBus is a family of high-speed packet-based databus standards, suitable for both networking and interdevice communication. They are optimized for high data density transactions. This project creates and documents the standards, schematics, and driver

This is the speed step daemon, for managing CPU frequency at runtime. Do not let the name fool you: it can be used with schemes other than Intel SpeedStep.

cdrom is a small C utility for controlling the CD-ROM drive (eject and speed) for GNU/Linux. It automatically mounts and unmounts the devices when used.

This program allows the user's laptop to act as a trip computer displaying fuel economy, speed, and other information about a car which is connected through a hardware device to the parallel port.

FTDI full speed Linux usb driver.