Search Results for "output"

...Arduino features: - control PC 4-pin fan with PWM; - measure temperature/humidity with DHT11/22; - adjust fan RPM depend on temperature; - console management; - MQTT serial output. front-end features: - data collection form serial port with MQTT - webUI with for sensors parameters

VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.

PRLL HAS MOVED TO GITHUB https://github.com/exzombie/prll A utility for parallelizing the execution of shell functions. Focuses on convenience in interactive use, but is just as usable in shell scripts. Put your multicore to good use, or combine prll with ssh to create an instant cluster.

###### HDDtempNC has now moved to Github ###### ###### Please visit the Github project at https://github.com/viharm/HDDtempNC ###### HDDtempNC provides a script to acquire hard disk drive temperature for a target host by querying an existing HDDtemp daemon and then parse the results according to the request. See project wiki for more details, usage and code.

...It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?topic=24226.0

...The device and the baud rate can be specified on the command line and a timeout can be set instead of just killing the process in order to stop it. You can also elect to have the output being sent to standard out to be time stamped.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. ...

The BIOE system is an open-hardware platform to bridge the gulf between open-source CACSD systems like Scilab and the physical plant. It is intended for engineers, students, hobbyists, and anyone interested in automation and mechatronic.

This program shows the packets in a USB communication, by decoding the output of a command like "cat /sys/kernel/debug/usb/usbmon/0u" into more human-readable form

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

A low cost software and hardware KVM over IP and remote Console monitoring solution running on Linux. Secure administration and access to remote keyboard/video/mouse and serial console output. Easily configured and customised to suit user needs.

ONLY LINUX RELATED SOFTWARE - Provides the interface for the PaceBook/TouchBook and SlimBook Pen - Tablet PC for Linux like backlight control , touchscreen drivers and calibration ( on-the-fly) , video output etc

The program 'jsbuttons' prints the state of joystick buttons as a decimal number to standard output. It can be used to control the system where keyboard input is impossible/unwanted. A (simple-to-build) four button pad can be used instead of a joystick.

Telmet processes data from the Conrad Electronics Telemetry-System (cat-no 108677-99) and is designed especially for reading out data at low framerates and for running 24-7 (weather observation). The output can be easily used as input for scripts or DBs.

A RTLinux X10 CM11 Driver using RT_COM. Plan on having a configuration file for input and control. In addition, plan on having output via HTML/CGI. Possibly have some control items via the web page.

Deamon that translate stream of joystic events (read = output from /dev/js0) to stream of MouseSystems events (read = input readable by gsm and/or X)