Search Results for "basic programming software"

The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.

Gammu is a cellular manager for mobile phones/modems. It contains libraries and functions for ringtones,logos,phonebook,SMS,etc. (used by external software), a command line version (with backup/restore) and SMS gateway (with MySQL and PostgreSQL supp

This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.

This software supports programming Logitech(R) Harmony(TM) remote controls. It provides most of the functionality of the Windows software provided by Logitech(R), but is much smaller and cross-platform. This software allows you to update or backup configurations, upgrade firmware, or do IR-learning. NOTE: Development has moved to github: http://www.github.com/jaymzh/concordance

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.

libuio is a light-wight C programming library to handle UIO device discovery and binding task.

This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.

This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle forat) • Firmware for applying PWM, UART communication and integrated colorspace transformations (AVR-ASM) • C++-Software for providing a HTTP-Server, a Dreambox picture grabber and basic light sequence player • HTML5/JavaScript application for remote controlling and configuring the system via Webbrowser Please use the SVN browser for accessing the whole development snapshot and getting an current tarball!

A free replacement firmware for the T/S 2000 derived from the T/S 1000 ROM.

This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

Jcapi will open the world of ISDN (Integrated Services Digital Network) programming to Java developers.

OSlash is a c++ framework for developing decentralized cloud computing services. It includes a programming environment and virtual machine for assembling networks of processing nodes coordinate their operations through message passing.

A binary compatible, open source, reimplimentation of the FTD2xx library which works under Linux, Windows and MacOS X. The library can also compile into a wine DLL to allow Window programs to use the FTD2xx devices (such as PIC programming software).

Open DMX USB interface: this project created by ENTTEC (www.enttec.com) is an open source hardware and software DMX512 interface

A collection of tools to tokenize PBASIC source code and send it to a BASIC Stamp microcontroller.

This library allows you to control a PMS (Particle Measuring Systems) Lasair II air particles counter. You can either use a COM component from several programming languages (Visual Basic, ...) or directly use its underlying Python class.

WXWindows software for programming PIC Microcontrollers using KitsRUs programmers under Posix and Win32 environments. Please There is a known bug with the project statictics. This Project is very active and there is data in CVS.

FreeSP is an infrastructure for programming platform-independend online signal processing applications. Ports to specific platforms (like DSPs and microcontrollers) are made by simply exchanging the freeSP System-module.

OpenProg is a combination of free software and hardware designs for programming of microcontrollers and serial EEPROMs over USB. Currently only in-system programming (ISP) of Atmel AVR controller is supported.

Generic API for emulating infrared (IR) remote controls by software.

We are developing a suite of software to control USB I/O devices. Initially the support will be for Windows and Linux hosted Human Interface Devices (HID) although hopefully this will extend to virtual comms. port control in the future. API coming...

PicBurner is a complete solution for programming Microchip PIC microcontrollers and maybe other microcontrollers and EEPROMs. The software will be build in Borland DS 2006, personality C++ and hardware will support RS232 and USB interfaces.

BSD SAM-BA is a free tool under ISC licence. Like the xp SAM Boot Assistant (SAM-BA.exe) this software provides a means of easily programming different AT91 devices. Communicating with the target device may be done through an RS232 or a USB link.