Search Results for "timer"

An EPICS high resolution timer and alarm clock library for Linux and RTEMS. EPICS is the Experimental Physics Industrial Control System framework. This library supports Linux by utilizing POSIX functions. For RTEMS VME-Bus systems it supports the CPU cards mvme2100, mvme5500 and mvme6500 ("beatnik" board support).

Sets your PC to sleep, hibernate, shutdown, or restart based on your time setting. Time may be set between 1 minute to 24 hours (in 1 minute increments). Countdown timer displays time remaining until the action occurs. This is a combined x64/x86 version. (Note: Tool is idle when time reads 0 hr:0 mins) Consider Windows 10 has changed the console "shutdown.exe" command to be active only for 30 minutes max. With DeneDown, you can extend your sleep/shutdown/hibernation period much longer, as it was in previous Windows versions. ...

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

...Version 1.5 adds: * The ability to trigger cause your firmware (BIOS or UEFI) to start on the next boot * The ability to have the advanced Windows boot options shown on the next boot. * Tooltips for all controls * Timer resets if you click one of the mode buttons that isn't selected.

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

...Compared to openchronos it has the following features: * system message bus for system<->module communication. * hardware RTC timekeeping (no more clock inaccuracy). * rework of timer and ports drivers. * implementation of a module system (drop in applications). * rework of the display routines. * rework of the menu system. The firmware code is also conceptually simpler and smaller which leaves room for more modules (applications).

APMtimer provides a Linux/Unix utility that can permanently Disable, Get, or Set the value of the APM timer found in recent Western Digital 2.5 WD*PVX Hard Disks where the APM setting defaults to 0x60 after a power cycle.

Interrupt-Driven Software UART based on Atmel Software Framework , tested on SAM3 Cortex M3 at 57600bps Start bit detection is managed by programmed GPIO falling edge interrupt handler, For bit timing is used timer counter, compare interrupt handler. Timer handler raises every 0.5 bit time periode and data sampling is managed by state machine in timer handler subroutine. Software can be used for any pin which supports external interrupt.

The Project "WDT Driver for LPC1114 on FreeRTOS" was my Project work required for the partial Completion of my Post Graduate Diploma in Embedded System Design at Center for Development of Advanced Computing, Advanced Computing Training School, Pune, India. The Duration of the Project was 15-20 Days wherein we had to develop the driver library for the Watchdog Timer on LPC1114 and incorporate the same into FreeRTOS. The services of the driver are exported using the UNIX like read, write, Open and ioctl system calls used by the various tasks in the FreeRTOS environment to register with the Watchdog service. The Watchdog service itself is a task running as an idle task hook and services the watchdog on behalf of all the tasks that are registered with our driver. ...

A very small and simple application that gives you time remaining to charge or discharge your battery (even if windows cannot).The final goal is to have an accurate timer that will tell how much time until your computer dies or fully charged.

This linux/unix utility can be used to remove or set the infamous idle3 timer found on recent Western Digital Hard Disk Drives.

Immersion Cooker Mk II: A food-oriented, feature-rich water-bath controller for slow cooking sous vide. Cook just about anything to perfection with open source hardware and software.

A kernel written by Merck Hung. IA32 architecture, 32-bit protected mode, Memory paging, Keyboard, Timer Interrupt Handling, and a simple kernel shell to operate. Written in C language, development under Linux environment.

The goal of this project is to create a program that will manage the timers in an Insteon Powerline Controller(PLC) without having to use the Insteon SDK. More info is at www.efundies.com.

wdt_s2723.c is a Linux loadable kernel module to drive the Watchdog Timer (WDT) on the Tyan S2723 Tiger i7501. The module interfaces with user space via the /proc filesystem.

Linux watchdog timer subsystem