Search Results for "source count"

This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each...

Wifi & Bluetooth driven, LoRaWAN enabled, battery-powered mini Paxcounter built on cheap ESP32 LoRa IoT boards. Paxcounter is an ESP32 MCU-based device for metering passenger flows in real time. It counts how many mobile devices are around. This gives an estimation of how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC addresses. The intention of this project is to do this without intrusion in privacy: You...

...The EC monitors your system's temperatures and controls the fan(s). It sits on the motherboard or is integrated into a Super I/O chip & is connected to the Southbridge via the Low Pin Count (LPC) bus.

Conditions: Kernel 2.6.31 (or later) with kernel filesystem sysfs (/sys) and proc (/proc) Content : Devicename, start-/end-sectors, sector size; label and UUID; filesystem and mountpoint (if mounted). Standard Call - List : blank od -l - System name (if lsb_release installed) - Architecture (with uname) - Kernel loaded (/proc/cmdline) - BIOS- or EFI-mode loaded - Device (/dev/sdXY) and partition count - Model name, disk size and logical/physical sector size - start,...

Count each time MagSafe(TM) is tripped and save your notebook. The aim of this software is to count every time a disconnection of Apple MagSafe(TM) power cord and a shock revealed by Motion Sensor happened.