Search Results for "smart card reader"

This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards....

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

The GlobalPlatform card specification is a standard for the management of the contents on a smart card. Mainly this comprises the installation and the removal of applications. This project offers a C library and a command line shell. Find more information on https://kaoh.github.io/globalplatform/

acsccid is a PC/SC driver for Linux/Mac OS X and it supports ACS CCID smart card readers. This library provides a PC/SC IFD handler implementation and communicates with the readers through the PC/SC Lite resource manager (pcscd).

PCSC lite is an I/O library for smart cards. This package provides the Python bindings for the PCSC lite libaray, thus letting you write smart card applications in Python. All available documentation can be read online at http://python-pcsclite.sourceforge.net/

L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card.

...Currently it is possible to communicate with a smartcard directly connected to a Arduino board or connected via a TDA8024T (or compatible chips. e.g. DS8024). All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte. - Support class for SLE4432 / SLE4442 / SLE4441 and SLE4440 compatible sychron smartcards. ...

This driver is intended to be used on any machine running Darwin or MacOS X with a JMicron SD Card reader such as the Dell Mini 9. It may also be extended to work with other SDHCI compliant hosts.

This is a library for easy accessing chip cards /smart cards via a chipcard reader. It currently works under Linux, FreeBSD and Windows. It is tested with Towitoko and Kobil readers.

USB Flash Memory (and Card Reader) memory and performance test.

Kernel level driver for GEMPLUS's GPR400 Smart Card reader and pcsc ifd interface library.

Application interface library for Smart Card & Magnetic Stripe Card Terminals, such as the IBM 4779.

Dexux allows a DexDrive, a Playstation memory card reader, to be used under Linux. We expect that mostly full functionality exists, but that it can be hard to use for end users. N64 DexDrive support is planned.