Search Results for "reference"

GuitarPedal is an experimental repository exploring a digital guitar-effects signal chain implemented with lean, low-level code. The project demonstrates how to read audio input, process it through simple transformations, and write the result out in real time with minimal latency. It emphasizes straightforward, inspectable DSP so developers can follow the math and tweak parameters without a giant framework in the way. The codebase favors portability and simplicity, focusing on a handful of...

Documentation, examples, and reference driver code for the VMware virtual graphics device used by all VMware virtual machines. This project provides the information and code necessary to write both 2D and 3D graphics drivers for this device.

The specifications and information for the 50 most common transistors used in small electronic circuits, robots, and prototyping.

This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs.

...This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY UNNECESSARY. Why not have the DLL as managed code?? Why not simply reference the library in your project and just call its functions?? This project does just that Licence: LGPLV3.: In summary, the only thing we ask is if you improve / bugfix / extend the library then feed these changes back into the project by emailing jon_newcomb or requesting sourceforge access. Applications you develop that use this library are not covered by this licence and can remain closed source and commercial

The OCCN project enhances SystemC2.0+ modeling by developing C++ classes for modeling user-defined or system-specific, point-to-point or multiaccess inter-module communication channels (or future network-on-chip) at various abstraction levels. To reference this work: M. Coppola, S. Curaba, M.D. Grammatikakis, R. Locatelli, G. Maruccia, and F. Papariello, "OCCN: a NoC modeling framework for design exploration", Design Automation in Europe Conf. (DATE), 2004, pp. 174--179. Available from Available from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.138.1281&rep=rep1&type=pdf

Java library that interfaces with "The USB INSTEON PowerLinc Controller" built by Smartlabs Design. This library is built on top of the javax.usb linux reference implementation, but should work under Windows as well.

I stoped driver development here. This project contains outdated version of the driver just for the reference, please visit Parabel ltd. site for the driver updates and support. Linux 2.6.x Zaptel driver for the 2,4 and 8 E1 ports Parabel Quasar E1 PCI/PMC interface board. This driver allows to use board as the hardware for the Asterisk(tm) project.

This project aims to build a USB 2.4-GHz transceiver, based on a reference design published by Cypress Semiconductor. The software, firmware and hardware design are included (open source). Hardware will be designed using the gEDA tools (including PCB).

The Simple Network Enhanced Zulu-time Device (SNEZ-D) or Aftermarket CHU Decoder (A-CHU) is a complete radio-to-interface time reference in-a-box with software that decodes the CHU radio signal, and can be interfaced to NTP servers.

Linux Driver for the infamous ELSA Microlink ADSL modem (sold in Belgium and probably in Germany). Based upon SAGEM FPS800 drivers, themselves (heavily) based upon Analog Devices reference drivers.