Search Results for "pkg-config"

...SnapKey's main role is to recognize when these keys are pressed and automatically release any previously engaged commands for them. This guarantees responsive and precise input handling. SnapKey handles the WASD keys by default and lets you rebind them to your liking via the config file. SnapKey: Open Source Alternative to Snap Tap & SOCD Visit SnapKey on GitHub for more information: https://github.com/cafali/SnapKey

VDT - Visual Disk Test : performs I/O tests on files, partitions, and/or disks with visual feedback/follow-up, offering flexible test area selection by size, location, percent, or combinations thereof, plus test duration control by time or size.

...First, Android natively has this feature, you can easily enable it by setting windowSoftInputMode in AndroidManifest.xml. The HOC can also be configured. Sometimes it's more convenient to provide a static config than configuring the behavior with props.

...You can easily clone the NBFC repository via git. Make sure the Mono runtime + development tools are installed on your machine (Debian based distros: mono-complete, Arch based distros: mono). Config files are an integral part of NBFC, because they define how NBFC interacts with your notebook's embedded controller (EC). The EC monitors your system's temperatures and controls the fan(s). It sits on the motherboard or is integrated into a Super I/O chip & is connected to the Southbridge via the Low Pin Count (LPC) bus.

...It uses GTK+ for its graphical interface and integrates well in GNOME desktop environment. It also uses WvDial dialer as its backend, providing simple configuration via config files. You can also use plain wvdial if you don't have X running. GTK PPP is GTK3 fork of GNOME PPP.

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

Checks for new Nvidia Geforce Display Drivers then does an automated unattended install, or with many more options. You can silent install, and only just install the basics, no bloat! Instantly check to see if you have latest driver offering.

************************************************************************************** Steppers redirected to fastio.h from marlin firmware min switches remaped to AUX-3, GBRL uses pin change interrupts simple scheme to allow future porting of next releases command buttons currently disabled Ramps pins config moved to ramps.h cpu_map.h - min switches added GRBL_RAMPS1_4.ino for arduino IDE ************************************************************************************** Ramps 1.4 | GRBL | Test X axis | X axis | OK working Z axis | Y axis for dual motor Y axis | OK working Y axis | Z axis | OK working Ramps AUX-3 pin 3 | min X | OK working Ramps AUX-3 pin 4 | min Y | OK working Ramps AUX-3 pin 5 | min Z | not tested

This free, standalone, exe flashes a borderless, configurable, area that will stay topmost while it's running. Drag it into place and then the only other configuration is an X,Y size input that is accessed by right clicking on the active area. You can even size it down to a single pixel (if you have the patience to interact with it). While running it flashes through RGB to hopefully loosen those dastardly stuck pixels. Open an instance and size it to your trouble-spot. Set it and let it...

Regulador de Temperatura de El Suri (GNU/GPL) Sólo para Linux, testeado en OpenSuSE 11.3 x64 con procesadores Turion X2 El Suri Temperature Control (GNU/GPL) Just for Linux, tested on OpenSuSE 11.3 x64 with Turion X2 processors

...You can adjust the speeds of your card. Soon you will also be able to do other things then just overclocking. You will be able to tweak OpenGL settings and your xfree86 config file.

This is a simple command line tool to customize CP2103 USB to UART bridge controllers in home-grown hardware. VID, PID, product name string, serial number string, and release version of the device can be changed next to GPIO port modes.

The SpaceNavigatorDriver project is an attempt to create a platform independent library to extract the HID data from the SpaceNavigator and send the position data to a registered listener. An attempt will also be made to make a config GUI.

A tool for adjusting the memory timings/clock speed of Athlon64`s built-in memory controller from the OS.

Powertweak-Linux is a port of the similarly named Microsoft Windows tool. It optimises your system to run at peek performance, by adjusting hardware settings, and config files. Work is underway in CVS to add features such as additional power management by

This proves a graphical user interface for configuring all web cameras supported under the PWC driver in a concise and intuitive manner.

setserial is a program designed to set and/or report the configuration information associated with a serial port.

Project to create an alternative to cpufreqd, with a high-configurable config file.

Switchboard is a hardware driver abstraction library for LabVIEW™ applications. Once integrated with you application you can acquire data from new devices simply by editing a text config file to let Switchboard know about your device.