Search Results for "host based firewall"

Wifi & Bluetooth driven, LoRaWAN enabled, battery-powered mini Paxcounter built on cheap ESP32 LoRa IoT boards. Paxcounter is an ESP32 MCU-based device for metering passenger flows in real time. It counts how many mobile devices are around. This gives an estimation of how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC addresses. The intention of this project is to do this without intrusion in privacy: You...

VTD-XML is the next generation XML parser/indexer/editor/slicer/assembler/xpath-engine that goes beyond DOM, SAX and PULL in performance, memory usage, and ease of use.

GQGMC is a user level driver for interfacing a Linux host to GQ Electronic's GMC-300 geiger-muller counter. Written in C++, the driver provides an interface method for each of the capabilities of the GMC-300. A sample command line text only program and sample Qt based GUI program are provided.

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

isp1760-hcd project will provides Linux Host Controller driver for the ISP1760 and ISP1761 based on USB High Speed ISP1760/1 Host Controller PCI kit. This driver provides BULK, INTERRUPT and ISOCHRONOUS transfer support.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

FPGA based hardware card which implements above 4 giga bps network traffic throughput under affordable hardware cost. With linux driver and kernel patch, software based IPTables/netfilter firewall can be easily upgraded to a multi-giga high end firewall.

XPMap for Hewlett-Packard XP and HDS USP Hi-End family Arrays: Visualization of Raid-groups, LDEVs/LUSEs and Host-groups.

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

Development area for GNU/Linux 2.6.x for the KS8695 ARM SoC. Covers kernel patches, drivers for serial, Ethernet, PCI, GPIO, watchdog subsystems, and drivers for optional PCI based devices such as USB, WiFi, WiMAX, IPSec, SSL, and RSA devices.

HBAVERIFY project is developing a C-based application for testing the Fibre Channel Host Bus Adapter (HBA) API, developed through the Storage Networking Industry Association (www.snia.org).

This project is developing a Java based CIM provider for Fibre Channel Host Bus Adapters (HBAs). It uses the common HBA API developed by the Storage Nerwork Industry Association (SNIA), available at: http://www.snia.org This project will conform to pro

PCEmu is a software-only PC emulator. It emulates an 8086-based machine with VGA text graphics, EMS memory, host file system access, and `hardware' debugging. It runs DOS and most programs correctly.