Search Results for "data driven"

...The intention of this project is to do this without intrusion in privacy: You don't need to track people-owned devices if you just want to count them. Therefore, Paxcounter does not persistently store MAC addresses and does no kind of fingerprinting the scanned devices. Data can either be stored on a local SD-card, transferred to the cloud using LoRaWAN network or MQTT over TCP/IP, or transmitted to localhost using serial (SPI) interface. LED Matrix display (similar to this 64x16 model, can be ordered on Aliexpress). SD-card (see section SD-card here) for logging pax data.

This is a work in progress split-flap display. Each module can flip between 40 unique characters: letters, numbers, and a few symbols. Multiple modules fit perfectly alongside each other to build bigger displays. The primary design goal was to make something that's possible to fabricate at home in small or single quantities and can be customized and built by an intermediate hobbyist at a reasonable price. This meant using widely available materials and avoiding any tooling with a high...

RIDE is a development environment for Robot Framework test cases. Robot Framework is a generic test automation framework for acceptance testing and acceptance test-driven development.

SmartKnob is an open‑source hardware/software hybrid rotary input device featuring software-configurable end-stops and virtual detents, facilitated by a brushless gimbal motor and magnetic encoder—offering programmable haptic feedback and a novel, tactile user interface. 240x240 round LCD ("GC9A01"), protected by 39.5mm watch glass on rotor. BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD. PCB flexure and SMD resistors used as strain gauges for press...

lm-sensors is the canonical Linux project for reading motherboard and peripheral hardware sensors—temperatures, fan speeds, voltages—and exposing them to userspace. It ships a probing utility (sensors-detect) that identifies I²C/SMBus chips and kernel drivers, then a runtime tool (sensors) that prints human-readable readings for quick diagnostics. The companion library, libsensors, gives applications a stable API to query sensor values, enabling desktop applets, monitoring daemons, and...

Interrupt-Driven Software UART based on Atmel Software Framework , tested on SAM3 Cortex M3 at 57600bps Start bit detection is managed by programmed GPIO falling edge interrupt handler, For bit timing is used timer counter, compare interrupt handler. Timer handler raises every 0.5 bit time periode and data sampling is managed by state machine in timer handler subroutine.