Search Results for "congkak game code"

This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards....

PC_Workman is what 680 hours of coding after warehouse shifts looks like. Built on a laptop hitting 94°C, this AI-powered monitoring tool does what Task Manager can't: it understands your system, not just measures it. Features: - Time travel monitoring - debug issues from hours ago - AI diagnostics with HCK_GPT - Custom fan curves with profiles - Floating always-on-top widget - 2D system map - Cross-GPU support (NVIDIA/AMD/Intel) Four complete rebuilds. 29 features killed....

...They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file.

This low cost project is a RC servo like position control of one or two geared motor(s) with a pot as angle feedback. You can send the arduino microcontroller a value from 0 to 1023 and the arduino will control the motor speed and direction to reach your target value. The PID algorithm will insure that the motor will not get into hold vibrations if the pot has some influences. This article will describe where you have to take attentions and what you have to setup to get the best results. The...