Search Results for "computer"
Sort By:
Showing 110 open source projects for "computer"
View related business solutions-
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
1
NanoKVM
Affordable, Multifunctional, Nano RISC-V IP-KVM
Lichee NanoKVM is an IP-KVM product based on LicheeRV Nano, inheriting the extreme size and powerful features of LicheeRV Nano. The Lichee NanoKVM is available in two versions: NanoKVM Lite is a basic configuration that is suitable for individual users with certain DIY capabilities and enterprise users with bulk requirements. The NanoKVM Full is a full version with a sophisticated case and complete accessories, as well as a built-in system mirror card that is ready to use at boot, and is... -
2
QMK
Keyboard firmware for Atmel AVR and ARM controllers
QMK (Quantum Mechanical Keyboard) is an open source community centered around developing computer input devices. The community encompasses all sorts of input devices, such as keyboards, mice, and MIDI devices. This is a keyboard firmware based on the tmk_keyboard firmware with some useful features for Atmel AVR and ARM controllers, and more specifically, the OLKB product line, the ErgoDox EZ keyboard, and the Clueboard product line. -
3
WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network adapters that support the 802.11n Wi-Fi standard. ...
-
4
Monsputer project
Documentation for the Z80 monsputer
The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA. -
Total Network Visibility for Network Engineers and IT ManagersThis means every device on your network, and every interface on every device is automatically analyzed for performance, errors, QoS, and configuration.
-
5
IIDC Camera Control Library
Capture and control API for IIDC compliant cameras
...Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. Keywords: ieee1394, IIDC, DCAM, firewire, USB, machine vision, computer vision, video capture, library -
6
WiFi Duck
Wireless keystroke injection attack platform
A user-friendly open-source project to learn about keystroke injection attacks or ‘BadUSBs’. By emulating a USB keyboard, BadUSBs can gain full access to a computer in a matter of seconds! Unlike with other BadUSBs, you don’t need to install an app, log in, compile, or copy scripts onto an SD card. You simply connect via WiFi to manage all your scripts from within the web interface. This tool is intended to be used for testing, training, and educational purposes only. Never use it to do harm or create damage! ... -
7
USB Gadget Tool
Convert your Android phone to any USB device you like
Convert your Android phone to any USB device you like. USB Gadget Tool allows you to create and activate USB device roles, like a mouse or a keyboard. Connected USB hosts (e.g. a normal computer) will then identify your Android device only under that role. It can also be used to deactivate the standard USB Gadget (including mtp, adb, etc.), e.g. for security reasons. -
8
Specialist-S
8-bit home-made computer on Z80 CPU
This is a renaissance of the "Specialist" micro-computer published in the popular "Modelist-Constructor" magazine issue #2, 1987 by A. Volkov. The original design was used the Soviet i8080A analog - KR580IK80A (KR580VM80A), but this one is based on the Z80A CPU. Postfix "S" in the project name designates a "simple" design. -
9
WinLIRC, the Windows port of the Linux Infrared Remote Control package. Control your computer via remote!
-
Scalable restaurant tech for stellar guest experiencesHungerRush helps restaurants compete in the toughest business on earth. We offer a fully integrated restaurant management system that’s easy to use and can be configured to engage your guests better, streamline your operations, master your own marketing, or all of the above. Want to offer online ordering? It’s built in. Want to get the latest performance data on your operations and marketing? No problem. Want to make customers for life by creating personalized experiences you know they’ll love? Order up. And since our system is backed by a dedicated and US-based support team, you’ll always be ready for the rush.
-
10
newlearnerspermit
C for programmable guitar amp
This project experiments with C language to discover and design a programmable guitar amplifier effects micro controller computer section of a tube and solid state designed guitar amp. This a collaboration electronics project with my son. The goal of this project is to use Arduino hardware with C language programming to manipulate the guitar signal by various effects of phaser, flanger, reverb, digital delay and echo, and tremelo. Also, the signals of two microphones, two guitars, and one mp3 device will be inputted into and passed through two 3-band programmable equalizers. ... -
11
EduMIPS64 (aka edumips) is a cross-platform MIPS 64 ISA simulator. It can be used to run and debug MIPS programs that are written using the MIPS64 instruction set. It supports visual debugging and lets you see what instructions do in the pipeline.
-
12
papouch-tmu
Utility to read data from Papouch TMU USB thermometer
...Check http://www.papouch.com. This utility can be used to obtain data from the Papouch TMU USB thermometer. The program is started immediately after the thermometer is pluged into the linux computer. The device sends the temperature in simple ASCII format every few seconds. Everytime a value is send, papouch-tmu utility reads the temperature and stores it into file /var/run/papouch-tmu/temperature. Program stops automatically when the thermometer is unplugged. The utility is coming with the munin plugin prepared. -
13
VirtScreen
Make your iPad/tablet/computer into a secondary monitor on Linux
Make your iPad/tablet/computer a secondary monitor on Linux. VirtScreen is an easy-to-use Linux GUI app that creates a virtual secondary screen and shares it through VNC. VirtScreen is based on PyQt5 and asyncio on the Python side and uses x11vnc and XRandR. -
14
-
15
jKPU
Cryptoprocessor design and documentation
A cryptoprocessor is a processor that does not do or use any encryption or decryption (thus escapes US export controls), but which works natively on encrypted data and code. Almost any encryption is possible, including "none at all". The trick is that a computer famously and happily takes garbage in and puts garbage out, just as happily as it does "2+2=4", so all we have to do is change our OWN idea of what is garbage and what is sense and the computer will remain happy but we then have a means of doing computation in public that looks like garbage to everyone else,. This project builds a cryptoprocessor model in Java. ... -
16
Open HPI is an open source implementation of the SA Forum's Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. The new location for the project is https://github.com/open-hpi/openhpi
-
17
iwattnick
iWattnick: the ultimate e-bike computer
iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. ... -
18
Gentoo CNC
Solution for changing your device into full-feature CNC controller
GentooCNC is a Gentoo based Linux didtribution designed to support hard real-time control of equipment such as industrial machine tools, 3D printers, laser cutters, robots, and coordinate measuring machines using LinuxCNC. GentooCNC is designed to target embedded platforms such as the BeagleBone, Mini2440, as well as conventional desktop platforms. -
19
USB Rubber Ducky
A human interface device programmable
...The source is written in C and requires the AVR Studio 5 IDE from atmel.com/avrstudio. Hardware is commercially available. Imagine plugging in a seemingly innocent USB drive into a computer and installing backdoors, exfiltrating documents, or capturing credentials. With a few well crafted keystrokes anything is possible. If only you had a few minutes, photographic memory and perfect typing accuracy. The USB Rubber Ducky injects keystrokes at superhuman speeds, violating the inherent trust computers have in humans by posing as a keyboard. ... -
20
NtdIsp
A system for programming LPC, STM32 and possible others devices.
This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported. -
21
PUB! Programmable USB Button
Program a button to send keystrokes to your computer
...When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit. -
22
Advanced Irrigation Controller
Automated Irrigation Controller for computers
AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . -
23
provaxantia
test project
Collect info about windows machines on your network, no matter if Lan or WAN. Slow and light process, day by day runs and add some more item. Very low effort for management, just put your subnet and set some schedule, after a couple of week the most of your machines will be in DB. After you collected data you can view them grouped and merged in variuous way. The core is wmic, a windows program that can get (almost) ALL info about every machine such as architecture, disk size,... -
24
Phoenix
Widgets to view infos about your computer (only Ubuntu and Debian dist
A simple program to show hours, date and computer infos, how your distro, architeture and processor. -
25
USB 007
A spy for USB drives.
...The 4 more important features are that ♦ Enabling & Disabling options of USB ports. ♦ Track which files-folders are sent from/given to your computer. ♦ Track how much time the drive was connected to your computer. ♦ Observe (by reading only) if there is any virus in the drive, without open it.
