Search Results for "c-bios"
Sort By:
Showing 1798 open source projects for "c-bios"
View related business solutions-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
AI-powered service management for IT and enterprise teamsGive your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
-
1
MK88 BIOS
Modiifed BIOS for MK88 PC
This project is aimed to produce modified MK88 BIOS with new features: 1. Improved keyboard driver 2. Support for cp866 encoding 3. Support for DS/DD drives 4. Support for ROM extension cards -
2
Monsputer project
Documentation for the Z80 monsputer
The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA. -
3
Fan Control
Highly customizable fan controlling software for Windows
Fan Control is a Windows utility designed to give users fine-grained, customizable control over system fans (CPU, GPU, case, etc.) based on temperature and sensor inputs. Rather than relying solely on BIOS fan curves, it allows dynamic adjustment of fan behaviour at the operating-system level — letting you react to real-time load, mix multiple sensors (CPU, GPU, motherboard, drives, etc.), and define custom fan-speed curves for different situations. The tool supports both manual mode (user directly sets fan speeds) and automated mode (fans follow sensor-driven graphs), enabling flexible tradeoffs between noise, cooling, and performance. ... -
4
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
libusb
A cross-platform library to access USB devices
libusb is a library for USB device access from Linux, macOS, Windows, OpenBSD/NetBSD, Haiku and Solaris userspace. It is written in C (Haiku backend in C++) and licensed under the GNU Lesser General Public License version 2.1 or, at your option, any later version. libusb is a C library that provides generic access to USB devices. It is intended to be used by developers to facilitate the production of applications that communicate with USB hardware. Using a single cross-platform API, it provides access to USB devices on Linux, macOS, Windows, etc. ... -
6
Steam Deck Tools
Fan, Overlay, Power Control and Steam Controller for Windows
Steam Deck Tools is a community-driven collection of utilities designed to enhance the experience of running Windows on the Valve Steam Deck. Hosted on GitHub and written primarily in C#, this suite bundles multiple practical tools into a single package, including fan control, performance overlay, power (TDP and refresh rate) adjustment, and Steam Controller support. The tools aim to fill functionality gaps when running Windows on a device originally optimized for SteamOS, such as adjusting thermal behavior or viewing real-time stats like FPS. ... -
7
OpenTabletDriver
Open source, cross-platform, user-mode tablet driver
OpenTabletDriver is an open-source, cross-platform, user mode tablet driver. The goal of OpenTabletDriver is to be cross-platform as possible with the highest compatibility in an easily configurable graphical user interface. OpenTabletDriver functions as two separate processes that interact with each other seamlessly. The active program that does all of the tablet data handling is OpenTabletDriver.Daemon. The daemon must be started in order for anything to work, however, the GUI is... -
8
AlienFX Tools
Alienware systems lights, fans, and power control tools and apps
AlienFX Tools is a suite of utilities aimed at controlling lighting, fan, and power behaviors on Alienware systems, directly interfacing with USB or ACPI hardware rather than relying on official drivers. This project supports a broad range of effects and modes, allowing users to customize RGB lighting zones, create and switch profiles based on system states (like power source or running applications), and generate lighting behaviors tied to thermal and performance events. Because it operates... -
9
Tasmota
Alternative firmware for ESP8266 with easy configuration
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits... -
Add Two Lines of Code. Get Full APM.Works out of the box for Rails, Django, Express, Phoenix, and more. Monitoring exceptions and performance in no time.
-
10
Synergy Core
The keyboard and mouse sharing tool
...Advanced customization settings give you complete control of your setup. The next version is being built from the ground up by combining the latest technologies, Node.js and React, with the rock-solid stability of C++. -
11
Karabiner-Elements
Powerful utility for keyboard customization
Karabiner-Elements is a powerful key remapper for macOS. -
12
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in... -
13
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
14
WS2812FX
WS2812 FX library for Arduino and ESP8266
This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each... -
15
QMK
Keyboard firmware for Atmel AVR and ARM controllers
QMK (Quantum Mechanical Keyboard) is an open source community centered around developing computer input devices. The community encompasses all sorts of input devices, such as keyboards, mice, and MIDI devices. This is a keyboard firmware based on the tmk_keyboard firmware with some useful features for Atmel AVR and ARM controllers, and more specifically, the OLKB product line, the ErgoDox EZ keyboard, and the Clueboard product line. Keyboards powered by QMK are Planck, Preonic, ErgoDox EZ,... -
16
FanCtrl
FanCtrl allows you to automatically control the fan speed
FanCtrl is a Windows desktop utility focused on automatically controlling PC fan speeds using temperature sensors and customizable fan curves, so your cooling behavior matches how you actually use your system. It combines monitoring and control in one place, letting you view temperatures, fan RPM, and control percentages while you tune how aggressively each fan responds. The project supports a range of control backends and integrations, including motherboard fan headers and several popular... -
17
RF24
OSI Layer 2 driver for nRF24L01 on Arduino & Raspberry Pi/Linux
Optimized high-speed driver for nRF24L01(+) 2.4GHz wireless transceiver. More compliant with the manufacturer specified operation of the chip, while allowing advanced users to work outside the recommended operation. Utilize the capabilities of the radio to their full potential via Arduino. More reliable, responsive, bug-free and feature-rich. Easy for beginners to use, with well-documented examples and features. Consumed with a public interface that's similar to other Arduino standard... -
18
Arduino FOC
Arduino FOC for BLDC and Stepper motors
We live in very exciting times 😃! BLDC motors are entering the hobby community more and more and many great projects have already emerged leveraging their far superior dynamics and power capabilities. BLDC motors have numerous advantages over regular DC motors but they have one big disadvantage, the complexity of control. Even though it has become relatively easy to design and manufacture PCBs and create our own hardware solutions for driving BLDC motors the proper low-cost solutions are yet... -
19
ThingPulse ESP8266 Weather Station
ESP8266 Weather Station library supporting OpenWeatherMap
This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE,... -
20
DIY Split-Flap Display
DIY split-flap display
This is a work in progress split-flap display. Each module can flip between 40 unique characters: letters, numbers, and a few symbols. Multiple modules fit perfectly alongside each other to build bigger displays. The primary design goal was to make something that's possible to fabricate at home in small or single quantities and can be customized and built by an intermediate hobbyist at a reasonable price. This meant using widely available materials and avoiding any tooling with a high... -
21
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards.... -
22
AWS EC2 FPGA
AWS EC2 FPGA hardware and software development Kit
...AFIs are reusable, shareable and can be deployed in a scalable and secure way. Development experience leverages an optimized compiler to allow easy new accelerator development or migration of existing C/C++/openCL, Verilog/VHDL to AWS FPGA instances. Fully custom hardware development experience provides hardware developers with the tools required for developing AFIs for AWS FPGA instances. -
23
Particle Firmware for the Electron, P1
Device OS (Firmware) for particle devices
The Photon uses an ARM Cortex M3 CPU based microcontroller. All of the code is built around the GNU GCC toolchain offered and maintained by ARM. The build requires version 5.3.1 20160307 or newer of ARM GCC and will print an error message if the version is older than this. In order to turn your source code into binaries, you will need a tool called make. Windows users need to explicitly install make on their machines. Make sure you can use it from the terminal window. The entire Particle... -
24
Hangfire
An easy way to perform background job processing
An easy way to perform background processing in .NET and .NET Core applications. No Windows Service or separate process required. Backed by persistent storage. Open and free for commercial use. Easy to set up, easy to use. No Windows Service, no Windows Scheduler, no separate applications required. Background jobs are regular static or instance .NET methods with regular arguments, no base class or interface implementation required. Once a background job was created without any exception,... -
25
NeoPixelBus
An Arduino NeoPixel support library
An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most...
