Search Results for "ekho-data"
Sort By:
Showing 31 open source projects for "ekho-data"
View related business solutions-
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
1
OpenTabletDriver
Open source, cross-platform, user-mode tablet driver
...The goal of OpenTabletDriver is to be cross-platform as possible with the highest compatibility in an easily configurable graphical user interface. OpenTabletDriver functions as two separate processes that interact with each other seamlessly. The active program that does all of the tablet data handling is OpenTabletDriver.Daemon. The daemon must be started in order for anything to work, however, the GUI is unnecessary. If you have existing settings, they should apply when the daemon starts. The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies. ... -
2
MongoDB NodeJS Driver
The MongoDB Node.js driver
The MongoDB Node.js driver allows Node.js applications to connect to MongoDB and work with data. The driver features an asynchronous API which allows you to interact with MongoDB using Promises or via traditional callbacks. Whether you are new to MongoDB or you just want to brush up on the core concepts, you can check out the Fundamentals section which features material on using the Node.js driver. The connection URI is the set of instructions that the driver uses to connect to a MongoDB deployment. ... -
3
WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network...
-
4
Drive Health Analyzer - SSD/HDD Monitor
Monitor disk health, predict failures, track SSD/HDD SMART attributes
Drive Health Analyzer is a comprehensive disk monitoring solution designed to prevent data loss by tracking the health status of SSDs and HDDs. The software reads SMART attributes, monitors temperature, analyzes disk performance, and predicts potential drive failures before they occur. It supports all major storage types including NVMe, SATA, and IDE drives. Features real-time alerts, detailed health reports, and automatic background monitoring. -
Demo Series - Small Business Backup By VeeamWatch this on-demand demo series and learn how to protect your Microsoft 365 data with clear, simple, actionable steps that are easy to implement for businesses of all sizes.
-
5
GeigerLog
Python program for Geiger counters and Environmental Sensors
GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. -
6
PC Workman HCK
AI-powered PC monitoring that explains. Not shows numbers/spikes.
Your PC says CPU 87%. PC Workman says why, since when, and what to do about it. Real-time system monitor with built-in offline AI. No cloud. Your data stays on your machine. What's inside: -hck_GPT: 82-intent AI assistant. -Ask it anything about your PC in Polish or English. -9-layer routing, learns your usage patterns over weeks. -TURBO mode: one click stops unnecessary services (Gaming/Work/Economy profiles), switches power plan, flushes RAM, freezes idle apps. -One click restores everything. ... -
7
This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.
-
8
i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.
-
9
WeeWX driver for Wario ME11/1x stations
WeeWX driver for Wario ME11/12/13/15 station
WeeWX driver for Wario ME11/12/13/15 station Copyright 2014-2020 Frantisek Muller For WeeWX version 4.x and higer (Python 3 support only) Wanet driver for ME11/12/13/15 weather station by WANET download data from a ME11/12/13/15 for use in weewx version 4 and higher Web site for stations Wanet http://www.meteo-pocasi.cz/ -
Build Securely on AWS with Proven FrameworksMoving to the cloud brings new challenges. How can you manage a larger attack surface while ensuring great network performance? Turn to Fortinet’s Tested Reference Architectures, blueprints for designing and securing cloud environments built by cybersecurity experts. Learn more and explore use cases in this white paper.
-
10
This project was originally designed to provide an open-source replacement for PPJoy. The product, at this point, consists of virtual joystick devices that is seen by the system as a standard joystick but its position-data is written to it by a feeder application. An existing feeder application that takes advantage of this product is SmartPropoPlus. If you are an application writer you can very easily write an application that controls a joystick (e.g. mouse-to-joystick, keyboard-to-joystick). If you are a beginner in device drivers you can take this code and enhance it to support more (or less) axes, buttons or POVs.
-
11
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. ... -
12
liblabpro
Open-source access to Vernier LabPro devices
liblabpro is a cross-platform C library for controlling and collecting data from Vernier LabPro devices. It is currently in an early work-in-progress stage and is not affiliated with Vernier in any way. As a test case, it also includes a basic program, labpro-console, for communicating with a LabPro using its plaintext command system. -
13
Uart32
Win32 API wrappers for accessing COM Uart in blocking mode
...This library works great for accessing a UART serial port from a background worker thread. It features: a simple c++ class. (temporarily removed for maintainance. Use DLL API Instead) built in per access timeout on data receive. a C-API wrapper that is exportable to C# DLL import class -
14
CANopen for LabVIEW
LabVIEW CANopen client library
A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode. -
15
This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie
-
16
The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.
-
17
Smartcard Lib for Arduino compat. boards
Smartcard access lib for Arduino based boards
...All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte. - Support class for SLE4432 / SLE4442 / SLE4441 and SLE4440 compatible sychron smartcards. Mostly used for secure data storage. Open points: - Error handling not completly implemented. ... -
18
Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus...
-
19
Voltcraft DL-141TH controller
A tool to download and configure Voltcraft DL-141TH devices.
This is a Perl application enabling downloading and configuring the Voltcraft DL-141TH temperature and humidity sensors device. Targeted at Operating Systems supporting libusb. This application exists thanks to reverse engineering. -
20
FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32
-
21
Portable .NET driver imports for Pico USB oscilloscopes and data loggers. Verified to be working under Windows and several Linux distributions.
-
22
Linux based client software and a set of AVR microcontroller devices that support the SportIdent electronic punching system used in orienteering. Clients send card data to a PHP/SQL web application, that serves as full featured event software.
-
23
logicAlloy ALE is RFID-EPC compliant RFID middleware. ALE collects and processes RFID tag data from RFID readers, then pushes RFID data to ERP apps. For more info on ALE, RFID and RFID tools, see www.logicalloy.com. logicAlloy - RFID made easy
-
24
The LogMeFree is a tool to transform NMEA frames to Google's KML. The data can be read from a file or directly from a GPS device (i.e. GPS logger, mouse).
-
25
The SpaceNavigatorDriver project is an attempt to create a platform independent library to extract the HID data from the SpaceNavigator and send the position data to a registered listener. An attempt will also be made to make a config GUI.