Search Results for "data.6bin"

...The goal of OpenTabletDriver is to be cross-platform as possible with the highest compatibility in an easily configurable graphical user interface. OpenTabletDriver functions as two separate processes that interact with each other seamlessly. The active program that does all of the tablet data handling is OpenTabletDriver.Daemon. The daemon must be started in order for anything to work, however, the GUI is unnecessary. If you have existing settings, they should apply when the daemon starts. The requirements to build OpenTabletDriver are consistent across all platforms. Running OpenTabletDriver on each platform requires different dependencies. ...

GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2.

Drive Health Analyzer is a comprehensive disk monitoring solution designed to prevent data loss by tracking the health status of SSDs and HDDs. The software reads SMART attributes, monitors temperature, analyzes disk performance, and predicts potential drive failures before they occur. It supports all major storage types including NVMe, SATA, and IDE drives. Features real-time alerts, detailed health reports, and automatic background monitoring.

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network...

This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.

i-Blue 747 / i-Blue 757 / Qstarz BT-Q1000 / i.Trek Z1 / Konet BGL-32 / Holux M-241 / ... control SW (for Java Phones, PalmOS, WinCe (PPC), Java platforms, Windows, Linux, and MacOS). Compatible with most MTK GPS Chipset based loggers.

WeeWX driver for Wario ME11/12/13/15 station Copyright 2014-2020 Frantisek Muller For WeeWX version 4.x and higer (Python 3 support only) Wanet driver for ME11/12/13/15 weather station by WANET download data from a ME11/12/13/15 for use in weewx version 4 and higher Web site for stations Wanet http://www.meteo-pocasi.cz/

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. ...

A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode.

This project defines a Standard API for access to the CAN (Controller Area Network) bus. The API provides functionality for ISO/OSI Layer-2 (Data Link Layer). The project is now hosted on GitHub: https://github.com/canpie/CANpie

...All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte. - Support class for SLE4432 / SLE4442 / SLE4441 and SLE4440 compatible sychron smartcards. Mostly used for secure data storage. Open points: - Error handling not completly implemented. ...

Note: The project has moved to https://github.com/pyhys/minimalmodbus The files available here are very old, download from Github instead. MinimalModbus is an easy-to-use Python module for talking to instruments (slaves) from a computer (master) using the Modbus protocol, and is intended to be running on the master. Example code includes drivers for Eurotherm and Omega process controllers. The only dependence is the pySerial module (also pure Python). This software supports the ‘Modbus...

This is a Perl application enabling downloading and configuring the Voltcraft DL-141TH temperature and humidity sensors device. Targeted at Operating Systems supporting libusb. This application exists thanks to reverse engineering.

Portable .NET driver imports for Pico USB oscilloscopes and data loggers. Verified to be working under Windows and several Linux distributions.

logicAlloy ALE is RFID-EPC compliant RFID middleware. ALE collects and processes RFID tag data from RFID readers, then pushes RFID data to ERP apps. For more info on ALE, RFID and RFID tools, see www.logicalloy.com. logicAlloy - RFID made easy

The LogMeFree is a tool to transform NMEA frames to Google's KML. The data can be read from a file or directly from a GPS device (i.e. GPS logger, mouse).

The SpaceNavigatorDriver project is an attempt to create a platform independent library to extract the HID data from the SpaceNavigator and send the position data to a registered listener. An attempt will also be made to make a config GUI.

CanFestival focuses on providing an ANSI-C platform independent CANOpen stack that can be implemented as master or slave nodes on PCs, Real-time IPCs, and Microcontrollers. A WxPython based CanOpen Object Dictionary editor GUI is also provided.

TagCentric is RFID middleware that controls heterogeneous RFID devices and gathers RFID-related data into a user-specified database. It's cost (free!) and simplicity make it ideal for use by small businesses, RFID testing facilities, and universities.

"DSO" is a Digital Signal Oscilloscope. My DSO will be connected via the USB to the PC. All software to operate the DSO is developed within this project.