Search Results for "power"

This project is a development area for a Linux Device driver for IBM Power Linux RAID SCSI HBA's, including the ipr driver and iprutils packages.

RAD Kernel is a custom linux kernel for whyred (Redmi Note 5 Pro/AI) that contains all features you need and aims for best balance between performance and battery.

This project includes a spin/wait handler for processing reset/shutdown behavior from a button, configuration files for setting this up as a service, and instructions for placing the files and enabling the service.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. ...

mochad is a Linux TCP gateway daemon for the X10 CM15A RF (radio frequency) and PL (power line) controller and the CM19A RF controller.

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

Query and control the power saving P-States of AMD processors. This allows you to fine-tune, overclock or undervolt your CPU.

Linux kernel level driver to allow access to the I/O of the Beckhoff CX-1100 power supply used with the Beckhoff CX-1000 embedded PC. This allows access to the K-Bus and IP-Bus of the Beckhoff system.

OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits

Small -Wall -pedantic C program, using libusb, developed mainly for Linux. Aimed to provide a fully functional (textual) interface for a Gembird USB device "Silver Shield Programmable Power Outlet Strip" (SIS-PM), including the beeper, sockets and time

AR-B1047 SRAM Linux device driver represents SRAM chips installed on the Acrosser AR-B1047 board as a set of files that may be accessed by user application and used for data that must be saved during power loss.

Ion consists of two parts. libion is a driver for the Insteon Power Line Controller sold by Smarthome. iond is a system daemon for handling asynchronous events and provides a TCP api for sending commands to Insteon devices.