Search Results for "high"

A very high quality package of printer drivers for CUPS on Linux and other POSIX-compliant operating systems. This project also maintains an enhanced Print plug-in for GIMP 2.x from the same code base.

libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions and direct camera register access. ...

...A plug-in interface allows any user add-on data-processing and special hardware and instrument support. Latest: NC-AFM and related explorative methods as SQDM can be configured. High-Speed external PAC-PLL hardware option with digital DSP link. Based on several hardware options it supports a commercially available DSP hardware and provided also Open Source Code for all the low level signal processing tasks and instrument controls in a most flexible and adaptable manner. All latest software is available via github.com/pyzahl/Gxsm4 (source code) or as binary for Ubuntu on https://launchpad.net/~totto/+archive/ubuntu/gxsm

EtherCard is a driver for the Microchip ENC28J60 chip, compatible with Arduino IDE. It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. ...

Linux HFI Device Driver for IBM's PERCS integrated high speed HFI network.

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

...It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating unnecessary bottlenecks. The tools described in this project enable the hardware engineer to develop DPR-FPGA systems more effectively for rapid control system development. For more information, related papers and user guide, please refer to: - https://sourceforge.net/p/prhardware/wiki/Home/ - http://www2.ensc.sfu.ca/research/iDEA/personel/victor_lesau.htm

Drivers and applications for the range of Scientific CCD cameras produced by Apogee Instruments Inc. Both ISA and Parallel interfaces are supported. A high level library and GUI are provided for Astronomical applications.

Custom ROM for the Samsung Galaxy S Plus including AROMA Installery by amarullz for an easy Instalation via CWM/FeaModRecovery.

Lockboxes are an experimental high performance inter-process communication (IPC) mechanism with access control. A lockbox can be used to share data, an open file handle, and state flags, with access control defining which users, groups or processes may ha

A high speed Linux kernel driver for the FTDI FT245BM USB chipset.

isp1760-hcd project will provides Linux Host Controller driver for the ISP1760 and ISP1761 based on USB High Speed ISP1760/1 Host Controller PCI kit. This driver provides BULK, INTERRUPT and ISOCHRONOUS transfer support.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

An high speed Linux device driver for the digital parallel I/O board DIO32HS produced by National Instrument. Currently we tested only computer input, were we get more than 5.5Mbytes/sec on a 32 bit wide bus.

FPGA based hardware card which implements above 4 giga bps network traffic throughput under affordable hardware cost. With linux driver and kernel patch, software based IPTables/netfilter firewall can be easily upgraded to a multi-giga high end firewall.

This driver integrates cards based on the Mentor Graphics multi-point high-speed OTG USB core with Linux kernels 2.6.x.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

High level 1-Wire API hiding the network protocol details from the API user

MyVIA is sub-project of THVIA project. MyVIA is a high performance user-level communication library. It is a user-level net driver for Myrinet high performance network. Please visit our homepage and send email to me: chyyuu@yahoo.com OR chyyuu@sohu.com