A command-line programmer for Atmel USB microcontrollers
A multi-platform command-line programmer for Atmel (8051, AVR, XMEGA & AVR32) chips with a USB bootloader supporting ISP. This is a mostly Device Firmware Update (DFU) 1.0 compliant user-space application.
This project has now migrated to GitHub. You can find the new repository at https://github.com/dfu-programmer/dfu-programmer
The serial LCD module using ATmega8 along with easy arduino library.
...It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600 is required to communicate with serialLCD module. The library & firmware file is released in public domain as open-source project. ...
Set of various C-routines for Atmel AVR MCUs, packed in several libraries, with fancy Makefile system for easy integration with user projects. Contains functions for UART, SPI, HD44780 or T6963C LCD\'s, Dallas 1-Wire bus, AVR bootloader and more.
Embedded PowerPC Bootloader Project, especially for Embedded PowerPC boards.
The code for this project is frozen. Development continues with the "U-Boot" project
(Universal Boot Loader, see http://sourceforge.net/projects/u-boot ).