Search Results for "test hardware"

An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along...

PK2Aux is a library and suite of command-line utilities for using the Microchip PICkit2 programmer device for purposes other than programming (such as the generic pin controls, serial UART, and logic analyzer modes provided by the Windows software).

liblabpro is a cross-platform C library for controlling and collecting data from Vernier LabPro devices. It is currently in an early work-in-progress stage and is not affiliated with Vernier in any way. As a test case, it also includes a basic program, labpro-console, for communicating with a LabPro using its plaintext command system.

can4linux is hosted on https://gitlab.com/hjoertel/can4linux since 2016. Don't use SourceForge anymore for this code. can4linux is an universal Linux device driver for ISA or PCI interface boards with CAN interface and embedded CAN controller solutions. Based on the API provided by can4linux commercial protocol stacks for CANopen, J1939 and DeviceNet are available. A first PCI board with an FPGA based CAN FD controller is supported (TARGET=IXXAT_IB500) in the CAN FD ISO mode but also non-ISO

aka: Schlang - A Deliberately Non-Object-Oriented Python Interface to COMEDI COMEDI datatypes and functions are replicated though this interface using the Python ctypes library. This allows the user to interface directly with comedi-lib though the comfortable interface of a Python interpreter.Object-Orientation of the interface is deliberately not provided so the coding style will loosely mimic C -- in this way, Schlang can be used to prototype and debug complex programs that will later...

A GPU memory test utility for NVIDIA and AMD GPUs using well established patterns from memtest86/memtest86+ as well as additional stress tests. The tests are designed to find hardware and soft errors. The code is written in CUDA and OpenCL.

A Linux driver for RTD DM5408 / DM408 ISA acquisition card. A DKMS module and a dynamic library written from scratch but trying to keep same functions structure of its official Windows 98 driver. I don't recommend it for production. I'm just trying to learn writing drivers for Linux with some interest in Electronics Interfacing.

A simple user level UDP/IP/Ethernet environment used to test and demonstrate the capabilities of the Linux VFIO driver. Includes drivers for 3 different Ethernet devices.

A small SDL application using OpenGL to test the compatability of Shader Model 3 on nVidia GTX 470

This project contains test software and tutorials for Analog Devices' Blackfin DSP device drivers and system services. See the wiki (in the menu bar above) for more info.

MOST4Linux provides a MOST kernel driver supporting synchronous data transfer for PCI hardware and userspace programs to test the driver. The driver can be compiled for Linux 2.6 or for the RTDM which works for the real-time extensions RTAI and Xenomai.

The Fault Injection Test Harness provides a uniform mechanism for writing reliable test case to validate a Linux device driver can gracefully handle software and hardware fault conditions.

MEA is an abstraction layer and API between vendor-specific measurement and instrumentation drivers and test applications that use them. All hardware-specific tasks are done by dynamically linked adapter modules.